JapCarForum
My celica supra - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My celica supra (/showthread.php?tid=6466)

Pages: 1 2 3 4 5

My celica supra - blueangel - 08-12-2018

Here some pix from where it started to where its at now, all the work done on the car so far has been done by myself on the drive or up at my mates yard in a tent lol.
hope you like
[Image: n617460563_2666201_6860.jpg]
[Image: n617460563_2666204_7472.jpg]
[Image: n617460563_2666203_7184.jpg]
Some may say why ruin a completly fine supra but i had a vision of what i wanted and the car i had previously was an N/A and a finished project and i couldnt imagine ripping it apart so i left that to the next owner.
Heres the engine bay too a lil messy but otherwise ok
[Image: mkiv002.jpg]
and the dash
[Image: mkiv005.jpg]

My celica supra - Lexusboy - 08-12-2018

Looking very nice so when do you refit the carpets.

What other plans do you have

My celica supra - blueangel - 08-12-2018

lol thats all the old **** lol
pix coming quite a few too lol
Axis 20" wheels
[Image: Image062.jpg]
Bomex skirts
[Image: photo004.jpg]
The first set of seats
[Image: 001.jpg]
the first set of coilovers
[Image: connorstarwars060.jpg]
A few shiney bits
[Image: 016.jpg]
The first design of tail lights
[Image: lights012.jpg]

My celica supra - Dark Samurai - 08-12-2018

I LOVE those tail lights.
Why is it called a celica supra?
I really like it.

My celica supra - blueangel - 08-12-2018

Ok second set of wheels 20" with 11" rears 9.5" fronts
[Image: pix2.jpg]
[Image: pix1.jpg]
A Trial rear was sourced but unfortunately it was a bad fit so load of modification was needed to get it to sit right
[Image: 010.jpg]
next was a genuine top secret gen2 front or i think its gen2 lol im not sure
[Image: 004-2.jpg]
All the intercooler pipes were powdercoated black ready for the dark engine make over
[Image: 003-1.jpg]

My celica supra - purplewitch - 08-12-2018

Suuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuupra Smile Love it, love those rims but how the 'eck do you keep it on the road on 20" wheels ... both mine are lethal on anything bigger than 18's

My celica supra - blueangel - 08-12-2018

Now the rear work can begin, id already relocated the filler cap to the top of the drivers arch at this point which in itself was a pain in the **** but with the harley davidson billet filler cap i think it looked very nice so a job worth doing.
Next was to start the real reason for the project
[Image: 004-8.jpg]
[Image: 003-7.jpg]
[Image: 006-7.jpg]
[Image: 007-7.jpg]
I made some glass fibre moulds of a set of gen7 celica headlights and trial mounted them to the car to find out A. where looked good and B.what angle was going to work with the wings.The wings were swapped out for a set of Do-luck wide wings in glass fibre and gave the front the stance i was after
[Image: 023.jpg]
[Image: 022.jpg]
[Image: 021.jpg]

My celica supra - blueangel - 08-12-2018

So the metalwork started to be cut out and the front started to take shape at last
[Image: 008-7.jpg]
[Image: 001-7.jpg]
[Image: 003-8.jpg]
Now i want this car to stay safe so all these parts that ive cut out will need to be remade to fit the new lights
[Image: 004-9.jpg]

My celica supra - blueangel - 08-12-2018

Whilst i was in the middle of doing this i also decieded that the rear end was going to be nice and smooth so the blending work began.
[Image: 002-4.jpg]
A set of custom 90mm veilside overfenders were made by a mkiv owner and those were postioned over the trial and work could carry on.
[Image: 003-5.jpg]
[Image: 011-1.jpg]
[Image: 012-1.jpg]
To make this trial rear look a little different i blended the recess on the rear and smoothed the profile down to give it a nice big smooth fat ****
[Image: 004-7.jpg]
[Image: 010-2.jpg]

My celica supra - Lexuspat - 08-12-2018

i really like it mate

i want more pics this looks awsome