+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: another is200 project (/showthread.php?tid=11683)
another is200 project - john wan - 22-04-2021
Well took her to work today got me there an back no problems got an annoying ticking noise sounds like tapits or a blow of some sort or my injectors only happens when in gear and driving sure itl do my head infor a few days till I sus it out had a little chatter from the turbo as I let off a couple of times made me grin like a mad man even wwriting this I find myself smiling like an idiot
another is200 project - Sparkystav - 22-04-2021
Ticking noise?
Could be the injectors?
another is200 project - john wan - 23-04-2021
Yeah kinda sounds like tapits but when I dip the clutch an rev it dies down to not really there started to sound diffrent to as me speed picked up bit more blowy like I said sure itl do my head in for a bit
another is200 project - Sparkystav - 23-04-2021
unless its one of the valves for the carbon canister etc?
another is200 project - john wan - 23-04-2021
Defo sounded like a blow this morn
another is200 project - john wan - 24-04-2021
New toys arrived today
![[Image: 20130605_180029_zps34ecddbe.jpg]](http://i822.photobucket.com/albums/zz146/johnwan_bucket/20130605_180029_zps34ecddbe.jpg)
![[Image: 20130605_182132_zps6e56c240.jpg]](http://i822.photobucket.com/albums/zz146/johnwan_bucket/20130605_182132_zps6e56c240.jpg)
So slightly bigger injectors and also a reducing pipe for fitting up me air filter a bit further away from the turbo being as me fitting I got for the turbo is 3inch and the pipe work I have from my induction kit I made is 2, 5inch so gotta do that and sort me exhaust blow and fitt me boost controller
another is200 project - ZAIS200 - 25-04-2021
Nice one John, what injectors are they again?
I just got a quote from Japanwarehouse for a full set of 6x360cc injectors delivered is £238
another is200 project - john wan - 25-04-2021
Oooo noce these are off a 1zzfe slightly bigger than the standard ones off the lex an at 66 quid delivered theyl do for me mate
another is200 project - john wan - 26-04-2021
So had a look at the new injectors an did some comparing so few more holes in the new compared to old
![[Image: 20130607_192200_zps314cf7e5.jpg]](http://i822.photobucket.com/albums/zz146/johnwan_bucket/20130607_192200_zps314cf7e5.jpg)
![[Image: 20130607_191453_zps86a90702.jpg]](http://i822.photobucket.com/albums/zz146/johnwan_bucket/20130607_191453_zps86a90702.jpg)
another is200 project - john wan - 28-04-2021
Well fitted me injectors lastnight an ****** fuel everywhere as I was to impatient to wait to get some new seals so have managed to seal them an go for a drive today set her up so I could get positive boost an **** shes quick need to de tune a bit as it was getting up to a bar of boost wich is way more than I should be running