Project baby BEL - Printable Version

Project baby BEL - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Project baby BEL (/showthread.php?tid=9591)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Project baby BEL - Mr Rae - 01-01-2020

Update!!

This was my task for the weekend, bit cold for it i admit.

So heres what i had to fit.....

[Image: Bracesandpipes.jpg]

Thats a Japspeed downpipe, Auto extreme decat pipe and the Japspeed front and rear strut braces.

Go the easiest job done first which was the front brace, fairly straight forward realy, just bolt on......

[Image: frontstrut.jpg]

......i then got on with the exhaust, got my dad to help me because it was ****** cold so wanted to get it done quick. Started by taking the old cat and downpipe off. Annoyingly i snapped a stud off so the mojority of the job was drilling that out. I dont have any pics for this as again it was too cold to mess about snapping shots. So got the stud drilled out and the shiney 3 inch bore downpipe and decat on and as soon as i struck it up i had a grin from ear to ear lol. I think MugenM422 said "it sounds like Ken Blocks rally car when u hit the limiter" so you get an idea of how loud it is. Most of you will get to hear it at RSCS.

So got that done yesterday and got the rear strut brace in today......

[Image: rearstrut.jpg]

......had to cut some small box shapped holes in the parcel shelf because i wanted to keep the tidy look inside.

So thats it at the moment.

Thanks for reading so far and i will bring more soon......... :thumbup:

Project baby BEL - Lexuspat - 01-01-2020

Looking good martin can't wait to here it running and I love the rear strut brace showing through the parcel shelf

Project baby BEL - MugenM422 - 01-01-2020

I'm so jealous of your build thread dude! Also that car is sounding so brutal now! De-cats on the list for Wednesday I think Wink

Project baby BEL - Dark Samurai - 01-01-2020

Mate I love the S14a, take me out for a spin at RCSC please Wink

Project baby BEL - Mr Rae - 01-01-2020

Thanks for the friendly comments chaps

Project baby BEL - Mr Rae - 01-01-2020

Dark Samurai Mate I love the S14a, take me out for a spin at RCSC please

Haha im sure we can sort summit, thanks dude

Project baby BEL - Dark Samurai - 01-01-2020

Yay Big Grin

Project baby BEL - N15_GTi - 04-01-2020

Awesomeness!

You might have to treat me to a blast tomorrow!! Smile

Project baby BEL - Mr Rae - 04-01-2020

N15_GTi Awesomeness!

You might have to treat me to a blast tomorrow!!

Have you been a good boy Daniel?? If so i will let you ride in my big car lol. Sure i can take you for a blast down the bipass Smile

Project baby BEL - Mr Rae - 11-03-2020

So its been a few months since an update, only a small one but quite a striking one i think.

I got my wheels, woohoo!!

[Image: wheels2.jpg]

So these arrived at my work on wednesday and i got them wrapped in rubber yesterday so heres a few pics using Instagram.

[Image: wheels5.jpg]

Slightly large pics but oh well lol

Thats it for the moment, more to come soon