+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Help Topics - Submit Your Help For Other Members! (https://www.japcarforum.com/forumdisplay.php?fid=155)
+--- Thread: DIY custom supercharger parts list (/showthread.php?tid=14118)
DIY custom supercharger parts list - P.Lindblom - 07-04-2024
A few people have asked me to provide them with the drawings for the inlets and outlets. The supercharger inlet is a bit awkward to dimension, since they are ususally made by flattening the pipe and making a matching hole in the flange, but I'll see what I can do.
Here are the other ones:
![[Image: eaton_m62_supercharger_outlet_1.jpg]](http://enabilfoto.se/content/other/tte/eaton_m62_supercharger_outlet_1.jpg)
![[Image: mini_bypass_valve_inlet_1.jpg]](http://enabilfoto.se/content/other/tte/mini_bypass_valve_inlet_1.jpg)
DIY custom supercharger parts list - Niliano - 08-04-2024
Thought I would post this up:
http://www.ebay.co.uk/itm/Mercedes-Kompressor-Eaton-M62-Lexus-Is200-Supercharger-/182122333947?hash=item2a675646fb:g:czgAAOSwKfVXLbNP
a supercharger for sale at present for a is200
DIY custom supercharger parts list - turbo 1 - 03-07-2024
hi i have trying to find a 150mm pulley in your parts list you put nissan nevaro do you have a part number as cant find one on ebay any would be great many thanks
DIY custom supercharger parts list - Wayne - 03-07-2024
The nissan pulley is 130mm if I remember correctly, not 150mm. As far as I'm aware, you'd need to custom make a 150mm pulley.
DIY custom supercharger parts list - turbo 1 - 03-07-2024
Ok thanks for the help
DIY custom supercharger parts list - Lexuspat - 04-07-2024
yeah as above the 150mm pulley would have to be made for it to fit
DIY custom supercharger parts list - turbo 1 - 04-07-2024
Hi again has anybody have part number for the 130mm pulley I most of the parts apart from pulley and cradle thanks
DIY custom supercharger parts list - Wayne - 04-07-2024
Only part number I have is from the 138mm merc pulley. 6032050110, if its any help. You will need to have the holes redrilled. Pretty sure you need the holes doing on the Nissan pulley, I assume Pat could tell you more.
Sent from my Nexus 7 using Tapatalk
DIY custom supercharger parts list - turbo 1 - 04-07-2024
Thanks I will check that out
DIY custom supercharger parts list - Lexuspat - 06-07-2024
Well just to give a heads up.
1 of the people that used this setup and design had his car dyno tested and the results are......
231.7bhp with the standard pulley.
WOW
sent from Admin HQ via tapatalk