JapCarForum
Lexus Is200 SE Project - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Lexus Is200 SE Project (/showthread.php?tid=11216)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Lexus Is200 SE Project - Sparkystav - 26-11-2020

Ste176 Yeah Sad thanks for Trying mate, I appreciate it! I found one on my is which was rediculous! Way beyond my skills and probably a bit pikey, so I would rather it go to Lexus. Better get myself ready for a big bill!

This is the one I found for the reset:

http://my.is/forums/f221/complete-remote-start-diy-including-immobilizer-bypass-390468/

Yeah but that doesn't help when it doesn't work in the first place lol

Lexus Is200 SE Project - DaveEdin - 27-11-2020

Site owner of bahamutcars is a member here (can't remember his username, but it's the french lad with an ISF) - chuck him a PM, see if he can help or get the site back up again?

EDIT - Yemgi is his username, just remembered...

Lexus Is200 SE Project - Ste176 - 27-11-2020

I may have to get in touch with him!

Turns out I blew the fuel pump relay :/ got it back today fixed and drving home the car completely shut down on me at about 60 on a country road. Obviously I'm pretty ******!
I'm pretty lucky I have some top mates and one of them sorted me out ad towed me home!

So now I'm thinking I have another blown fuel relay but now my fuel pump has died as well!?
Any other ideas on this guys?

Cheers

Lexus Is200 SE Project - Sparkystav - 28-11-2020

So the circuit opening relay blew? Odd, may be an issue with the voltage from the ecu to the 2 relays. Have you checked the efi relay?

Lexus Is200 SE Project - Ste176 - 28-11-2020

Sparkystav So the circuit opening relay blew? Odd, may be an issue with the voltage from the ecu to the 2 relays. Have you checked the efi relay?

Yeah that's the one stav. Efi Relay is absolutely fine?? It's bizarre, I'm waiting for a call from the garage and there going to come and tow her away :/

Lexus Is200 SE Project - Sparkystav - 28-11-2020

the relay/ecu setup is so overly complex though,

the key turns on the circuit opening relay, that turns on the fuel pump, but also turns on the ecu. The ecu then sends 12v to the efi relay and that powers all the sensors up.

Lexus Is200 SE Project - Sparkystav - 28-11-2020

have you touched anything in the ecu box or anything?

Lexus Is200 SE Project - Ste176 - 28-11-2020

Sparkystav the relay/ecu setup is so overly complex though,

the key turns on the circuit opening relay, that turns on the fuel pump, but also turns on the ecu. The ecu then sends 12v to the efi relay and that powers all the sensors up.

Sparkystav have you touched anything in the ecu box or anything?

It's a strange one or so I'm told it is and after hours of research I think it mustn't be very common. Touched absolutely nothing in the ecu box mate. Not my area to play with!
It's back at the garage and were replacing the fuel pump, they think it's overloading the system (I think that's what they said) I've orderd a walbro 255 lph one for a jap supra j, Stix said that's the one he's using and it's a good upgrade considering I'm looking to supercharge it eventually! We will see how this goes!?

The only thing we have changed on the car is a full stainless steel exhaust straight through! So unless the Tiny amounts of pressure increase top end have effected it (which I doubt) I think it's been on its way out for a while.

Lexus Is200 SE Project - Sparkystav - 28-11-2020

hmm very very odd mate, keep us updated with what happens

Lexus Is200 SE Project - Ste176 - 28-11-2020

Whilst i have no updates on my current issue, before the car was towed i trialed my TTE front bumper and my TRD sideskirts!

[Image: F595D307-34E3-4525-9737-07E1E657012C-227...4766F9.jpg]

[Image: 677A6C92-74A6-44E8-A464-7317889DB5B6-227...6FED07.jpg]

Pretty happy with how there coming along. Im booked in for paint at the beginning of feb and ill get hem fitted for the first car meet of the year up here on the 24/2/13!

Also, at my lowest point, im lower than a standing up multi tool :w00t:

[Image: 3960A072-09C6-46C3-B34D-BC916964C104-227...340C6C.jpg]


Cheers