+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Lexus is200 se (/showthread.php?tid=13061)
Lexus is200 se - is200turbo - 20-12-2023
Would a pair of 12" spal fans be a good replacement for the standard fans to give me some more room and would a 550x140x62mm 2.5" intercooler be the right size?
Sent from my iPhone using Tapatalk
Lexus is200 se - phaebo - 20-12-2023
is200turbo would a 550x140x62mm 2.5" intercooler be the right size?
Sent from my iPhone using Tapatalk
that intercooler size is perfect. It will fit with spot on without having to remove the crashbar.
I use 550x140x65 with my supercharger setup.
![[Image: null-66.jpg]](http://i5.photobucket.com/albums/y190/danielelitez/null-66.jpg)
![[Image: 066E73FE-62CC-4A22-9B60-5A7A507079F0-513...DAFD-1.jpg]](http://i5.photobucket.com/albums/y190/danielelitez/066E73FE-62CC-4A22-9B60-5A7A507079F0-51382-000064EF950DDAFD-1.jpg)
Lexus is200 se - is200turbo - 20-12-2023
Brill cheers mate
Sent from my iPhone using Tapatalk
Lexus is200 se - is200turbo - 20-12-2023
What size fuel return will I need is it an6 and what size feed from the sytec regulater to the fuel rail, do I need an10 oil return and an4 oil feed to the turbo?
Sent from my iPhone using Tapatalk
Lexus is200 se - Sparkystav - 21-12-2023
I use an6 so should be good.
Oil feed depends on turbo. For ball bearing they need a restrictor I think
Lexus is200 se - is200turbo - 21-12-2023
I've not found a turbo yet, will I be ok with a an4 feed and if I get a ball bearing turbo I will restrict it.
Is this the pump and regulator I need
![[Image: 618ABC3A-4541-4D6E-8393-6C9859736A15.png]](http://s1233.photobucket.com/user/v6tcolt/media/Mobile%20Uploads/2016-02/618ABC3A-4541-4D6E-8393-6C9859736A15.png.html)
![[Image: D53497ED-8084-4BA2-B202-A2E3ECEDC860.png]](http://s1233.photobucket.com/user/v6tcolt/media/Mobile%20Uploads/2016-02/D53497ED-8084-4BA2-B202-A2E3ECEDC860.png.html)
Sent from my iPhone using Tapatalk
Lexus is200 se - Jimbob-T-Lex - 05-01-2024
just make sure the fuel pump is a genuine walbro one mate not a cheap knock off
With the regulator id suggest getting one with a gauge for easier to set your fuel pressure at 3 BAR at idle.
Lexus is200 se - is200turbo - 05-01-2024
I will do mate cheers,
Can you tell me what and how many AN fittings and braided line I need for the full conversion
Sent from my iPhone using Tapatalk
Lexus is200 se - Sparkystav - 05-01-2024
I used an6
Lexus is200 se - is200turbo - 05-01-2024
That's for the fuel, how about the oil feed and return?
Sent from my iPhone using Tapatalk