+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Bandit's Supercharged IS200 take 2 :-) (/showthread.php?tid=5114)
Bandit's Supercharged IS200 take 2 :-) - Lexuspat - 01-07-2018
looks really nice mate top work asusual
Bandit's Supercharged IS200 take 2 :-) - Bandit - 01-07-2018
Cheers guys, i did it yesterday but it does need a lot of work to make it look right :crying:
So looks like i'll be sanding it down again and do it properly this time :Chair:
Knew i should of done it right the first time, but thought i'd see how it looked 1st :Chair: :lol::lol:
Bandit's Supercharged IS200 take 2 :-) - Bandit - 01-07-2018
Another part made today, fitted the rad bottle cover (still needs cleaning up) and a new oil filler cap :thumbup1:
![[Image: radcover2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/My%20Lexus%20Supercharged%20Lexus%20IS200/radcover2.jpg)
So parts fitted so far to the car are...
TTE Supercharger,
Custom induction kit,
HKS fcd,
HKS SSQV,
HKS Boost Gauge,
Exeddy organic clutch
Blue Flame cat back exhaust,
Decat Manifold
6000k HID kit,
Sport Grill,
Carbon VVT-i and Alternator covers,
Vented front fog lights,
Stainless Dial Kit,
Multi coloured led dash lights,
Clear door lights,
UV foot well lighting,
Wood dash kit.
TTE Anti Roll Bars
Koni top adjustable shocks
Koni lowering Springs
New Radiator
Rad Bottle cover
PAS Bottle cover
Polished Rocker cover
Polished Shock top covers
Fitted the washer jets (Thanks Moley)
Oil cap (got to polish it yet?)
Part sprayed the bonnet,
+LED'S,stainless dial kit....etc... etc
Next should be the brake fluid bottle cover, then i need to get the supercharger and pipework polished up? and figure out what colour to spray the covers? then try and hide the wiring to tidy up the top of the engine itself??
Got so much to do before JAE and not enough time :crying:
cared: not doing to bad in the time i've re-owned it though?? 
.
Bandit's Supercharged IS200 take 2 :-) - spikes - 01-07-2018
bonnet looking good,:thumbup1:
Bandit's Supercharged IS200 take 2 :-) - Bandit - 01-07-2018
spikes bonnet looking good,:thumbup1:
Cheers matey, still go to rub it down and do it properly so hoping it turns out ok?? :thumbup1:
Bandit's Supercharged IS200 take 2 :-) - Dark Samurai - 01-07-2018
you can see in the pic how well lacquered those CF VVTi and alternator covers look
Bandit's Supercharged IS200 take 2 :-) - Bandit - 01-07-2018
Dark Samurai you can see in the pic how well lacquered those CF VVTi and alternator covers look
Yeh i stripped them back a bit then resprayed them, so there looking a bit brighter, going to give them another 4 or 5 coats of lacquer yet though :thumbup1:
Bandit's Supercharged IS200 take 2 :-) - banky - 01-07-2018
car is looking gr8 m8 thes the way a wanted mine 2 look have you though about gettin the car rapped ?
Bandit's Supercharged IS200 take 2 :-) - Bandit - 01-07-2018
Cheers mate, i did think about having the bonnet, roof and boot wrapped but the cost of having it done was stupid, even if i did it myself it still worked out too much for the wrap itself?
cared:
Bandit's Supercharged IS200 take 2 :-) - Fozzy - 01-07-2018
I like the bonnet idea. Its going to look good once you get a TRD kit for it again.
Im amazed how well those carbon bits have come up, they were so flat when fitted to Rabsters car. I wish i had the ability to work at the speed you do, id have everything done on it by now