+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My new toys (/showthread.php?tid=725)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
My new toys - dimis - 01-03-2021
phaebo Awesome results! Very nice lines! I allready thought you had the most powerfull is200 with sc kit fitted. How many horsepower is it on the engine?
Keep up the good work!
I think around 270hp if we assume there is 15% loss.
My new toys - DaveEdin - 01-03-2021
:thumbup: Awesome...
My new toys - dimis - 01-03-2021
DaveEdin :thumbup: Awesome...
Thanks mate....i hope i inspire some of you....this is the reason that i post in my thread and not to show off.
My new toys - Colin G - 01-03-2021
Excellent result mate, nice graph too. Bet you are very happy with the results.
Sent from My Blackberry Via Tapatalk
My new toys - dimis - 01-03-2021
cougarrsv Excellent result mate, nice graph too. Bet you are very happy with the results.
Sent from My Blackberry Via Tapatalk
Yes I am mate, and I am more happy that the engine did not boom! 235whp with standard internals. The point is to have a good setup and a good mapper.
My new toys - Sparkystav - 01-03-2021
I thought all power graphs should cross at 5252rpm?
My new toys - dimis - 01-03-2021
Sparkystav I thought all power graphs should cross at 5252rpm?
What do you mean mate?
My new toys - Sparkystav - 01-03-2021
dimis What do you mean mate?
Bhp is worked out from an equation, not measured in its own right.
Bhp = rpm x lb/ft / 5252
So when rpm is 5252rpm bhp = lb/ft
But on your chart they don't cross 6200 ish rpm so something's wrong with the print out. I know the axis are different but they should still cross at the same rpm
My new toys - dimis - 01-03-2021
Sparkystav Bhp is worked out from an equation, not measured in its own right.
Bhp = rpm x lb/ft / 5252
So when rpm is 5252rpm bhp = lb/ft
But on your chart they don't cross 6200 ish rpm so something's wrong with the print out. I know the axis are different but they should still cross at the same rpm
But in the chart red (power) and blue (torque) trendlines cross at around 6200rpm
My new toys - Dark Samurai - 02-03-2021
Sparkystav Bhp is worked out from an equation, not measured in its own right.
Bhp = rpm x lb/ft / 5252
So when rpm is 5252rpm bhp = lb/ft
But on your chart they don't cross 6200 ish rpm so something's wrong with the print out. I know the axis are different but they should still cross at the same rpm
I agree with this statement, Stavert.
Dimis, BHP = RPM x lb/ft / 5252. So when RPM is 5252 RPM, BHP = lb/ft.
But unfortunately, on your chart, they don't cross until approximately 6200 RPM, so something is wrong with the print out! I know the axis are different but they still cross at the same RPM.
I do not like to be the bearer of bad news. But that's the way the cookie crumbles.
Thanks for your time.
Professor Oliver.