+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Jimbobs Lexus IS200 Turbo! (/showthread.php?tid=7339)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
Jimbobs Lexus IS200 Turbo! - Sparkystav - 16-11-2024
so the gearbox fits the trans tunnel?
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 16-11-2024
Yeah mate from what I can tell at present. Need to mount it and I'll check all clearances. May need to modify slightly for slave cylinder.
Sent from my iPhone using Tapatalk
Jimbobs Lexus IS200 Turbo! - Wayne - 16-11-2024
Is that a TRD yellow bar I see?
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 16-11-2024
Yeah mate front and rear
Sent from my iPhone using Tapatalk
Jimbobs Lexus IS200 Turbo! - Wayne - 16-11-2024
Let me have em...
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 16-11-2024
Lol not a chance hahaha
Sent from my iPhone using Tapatalk
Jimbobs Lexus IS200 Turbo! - Wayne - 17-11-2024
ad:Only place I can seem to find em is on Jauce... been looking at Hotchkis, but I hear they are very stiff.
Jimbobs Lexus IS200 Turbo! - dimis - 22-11-2024
Wayne
Only place I can seem to find em is on Jauce... been looking at Hotchkis, but I hear they are very stiff.
Hotckis are adjustable and so stiff as you may think.
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 27-11-2024
Well started today by sorting out my shifter location. Using an arm off of a BMW 1 series but still had to cut down. Try and get this welded up this week.
![[Image: 1d42b692bbffbbaa9efd133727f50a1f.jpg]](http://uploads.tapatalk-cdn.com/20170108/1d42b692bbffbbaa9efd133727f50a1f.jpg)
Also cut the shifter link I'll weld that tomorrow if I get home from work decent time.
![[Image: 7cc3d07ed48cf37ffacc7c5b429b0e0b.jpg]](http://uploads.tapatalk-cdn.com/20170108/7cc3d07ed48cf37ffacc7c5b429b0e0b.jpg)
Mounted my forge power steering reservoir
![[Image: 6a5abaf0d9eba731a1abddefe1f82cf8.jpg]](http://uploads.tapatalk-cdn.com/20170108/6a5abaf0d9eba731a1abddefe1f82cf8.jpg)
FPR mounted at the back on bulkhead
![[Image: 47a8a8ec0572e796e4dc843979ce8011.jpg]](http://uploads.tapatalk-cdn.com/20170108/47a8a8ec0572e796e4dc843979ce8011.jpg)
Intercooler put in place just need to mount to crash bar as just sitting at present. Think I'm going to cut some holes through it also as it does cover a fair portion.
![[Image: 8cde2678112c5aa865bbfa28cd8ddcd7.jpg]](http://uploads.tapatalk-cdn.com/20170108/8cde2678112c5aa865bbfa28cd8ddcd7.jpg)
Still need to get throttle cable bracket from a non drive by wire 1JZ
![[Image: a88578aa581c6789c74339d324ae5f5c.jpg]](http://uploads.tapatalk-cdn.com/20170108/a88578aa581c6789c74339d324ae5f5c.jpg)
Main things still to do is gearbox support and propshaft but slowly getting there now.
I'll order my silicone bits so I begin to plumb it all in.
Still got to finish wiring in the Ecu but want to get some plugs so engine harness is not hard wired.
Hopefully I'll make some good progress and update again soon.
Sent from my iPhone using Tapatalk
Jimbobs Lexus IS200 Turbo! - dimis - 27-11-2024
How big is the intercooler mate? What HP rated? What HP are you aiming? From the pics I think it is small. I would say no more than 350hp.