JapCarForum
Jimbobs Lexus IS200 Turbo! - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Jimbobs Lexus IS200 Turbo! (/showthread.php?tid=7339)



Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 27-11-2024

500bhp looks small in picture because crash bar, is the same one I ran on the Turbo IS200. I have got make holes in the crash bar for more air flow bit like urs but I'll just cut not weld a piece in. Will only be running 300bhp to start off with. Main thing is getting the car running for show season then I'll upgrade more.


Sent from my iPhone using Tapatalk


Jimbobs Lexus IS200 Turbo! - Wayne - 28-11-2024

Holes in the bumper worked a treat on the soarer!


Jimbobs Lexus IS200 Turbo! - dimis - 28-11-2024

Jimbob-T-Lex 500bhp looks small in picture because crash bar, is the same one I ran on the Turbo IS200. I have got make holes in the crash bar for more air flow bit like urs but I'll just cut not weld a piece in. Will only be running 300bhp to start off with. Main thing is getting the car running for show season then I'll upgrade more.


Sent from my iPhone using Tapatalk

Fair enough mate.keep up the good work


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 10-12-2024

Well bit more achieved today

[Image: b0d25f439186e339944545323a7bbcc6.jpg]

[Image: 734943d7e73c94478edea75d013427f8.jpg]

[Image: f25d34e44b8707d2122691909c34ebd2.jpg]

[Image: 84ef0a5683df2eff9d4d240e114eb614.jpg]

Gear shifter in correct location now just got to sort the rear mount then that is fully complete.

[Image: b2967db6c28cd984a042e5cad9752a82.jpg]

Pipe work for the filter sorted

Also plumbed in the low pressure powersteering lines, just got to wait for my 120 degree fitting to come and then the high pressure line will be fitted.

[Image: 5edab8a669297bd5f67f70b90d754c98.jpg]

[Image: 8ef574d0a7eacf683b303b846d83eb73.jpg]

Waiting on a straight an6 teflon fitting and a 90 degree then I can plumb the fuel lines in.

[Image: fe49c584d646a9cd2ff28c61439f61aa.jpg]


Sent from my iPhone using Tapatalk


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 10-12-2024

Also ordered a BMW propshaft so I can cut the end off and weld that to original prop.

Ordered intercooler piping so that can then be plumbed in.


Sent from my iPhone using Tapatalk


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 10-12-2024

Jimbob-T-Lex Also ordered a BMW propshaft so I can cut the end off and weld that to original prop.

Ordered intercooler piping so that can then be plumbed in.

[Image: bd3be1ef588edc7cfc2163a50dc043a8.png]


Sent from my iPhone using Tapatalk






Sent from my iPhone using Tapatalk


Jimbobs Lexus IS200 Turbo! - dimis - 10-12-2024

Looking good mate. Will the gear hit the console in 2nd and 4th gear?


Jimbobs Lexus IS200 Turbo! - Sparkystav - 10-12-2024

Great update mate!


Sent from my iPad using Tapatalk


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 10-12-2024

No mate all clears fine no issues at all


Sent from my iPhone using Tapatalk


Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 10-12-2024

Oh that's with out the short shifter fitted as well so even less movement lol


Sent from my iPhone using Tapatalk