+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My IS200 Blog (/showthread.php?tid=12103)
My IS200 Blog - Sparkystav - 12-10-2021
That's why I had 215 on the front, I had 15mm spacers (to cover the supra brakes) and it was lowered.
My IS200 Blog - Colin G - 12-10-2021
I'm looking to change my wheels in the new year tbh. Hopefully be able to swap the current tyres onto the new rims, but may need to get new rubber with a bit of stretch due to the offset and the fact I'm also planning coilovers (though not wanting to drop it on the floor, just get it to a nice height and get rid of the arch gap)
My IS200 Blog - Colin G - 12-10-2021
Stoney Looking good Colin. I see a lot of people with that section of the rear lip in black. My whole car is black, but I am thinking of maybe cutting out the entire section which you have painted black, just to be different!
Would be different, but from seeing how mine has fitted. If you were to cut out the recessed section, you would also have to cut part of the standard bumper behind it too.
My IS200 Blog - Colin G - 12-11-2021
Well, not alot has happened over the past few weeks. Its been into the garage and had a bit of work done due to not running properly. It went down to 3 cylinders, changed the plugs and coil packs but didn't make much of a difference so gave it to my local garage who eventually found the cause of the fault to be a collapsed cat on the manifold
![[Image: V__2DD2_zps734133de.jpg]](http://s100.photobucket.com/user/gixxer500/media/Lexus%20IS200/V__2DD2_zps734133de.jpg.html)
So rather than a new manifold got them to gut both the cats. Running sweet as again, albeit a little louder. Its also alot more responsive too.
Few more stickers been added to the rear screen
![[Image: InstagramCapture_939af04b-3083-4253-8a1d...ed8e29.jpg]](http://s100.photobucket.com/user/gixxer500/media/Lexus%20IS200/InstagramCapture_939af04b-3083-4253-8a1d-49f9a8923f2d_jpg_zpscaed8e29.jpg.html)
And Ive just brought the following bits, not picked them up yet though. Should hopefully be able to connect the screens upto my headunit so they all run as one, then the dvd player and extra screen will be spare/for sale once its all sorted.
![[Image: screen1_zps207f641e.jpg]](http://s100.photobucket.com/user/gixxer500/media/Lexus%20IS200/screen1_zps207f641e.jpg.html)
![[Image: screen2_zps9beb39c8.jpg]](http://s100.photobucket.com/user/gixxer500/media/Lexus%20IS200/screen2_zps9beb39c8.jpg.html)
My IS200 Blog - Sparkystav - 13-11-2021
Nice little update mate. Always helps to have a less restrictive exhaust
My IS200 Blog - Rabster - 03-12-2021
So did you fit all the bits or did you sell before you had the chance mate ?
My IS200 Blog - Colin G - 08-01-2022
Only just seen the reply. Seats were fitted before I sold the car. Still got a few bits taking up space in my garage though lol