![]() |
|
My Subaru WRX - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156) +--- Thread: My Subaru WRX (/showthread.php?tid=2443) |
My Subaru WRX - russelllinn - 01-05-2018 [SIZE="3"]bit of an update on the project, I have fitted the rear Teins with my brother which was easier enough, unfortunately on the front stuts the lower retaining collars were both stuck so had to cut them off so will be ordering new ones soon. Today we had a local rolling road session which shows the improvment on the works I have had done, although a lot of the cars had readings that were a lot lower than last time which was worrying, not sure what is going on there, maybe I have more power then :tongue_smilie: got a slight boost drop though at about 5,600 rpm which need to look at otherwise really smooth and good fuelling etc[/SIZE]
My Subaru WRX - russelllinn - 10-05-2018 Father's Day present from Ava :biggrin:
My Subaru WRX - Lexusboy - 10-05-2018 Did Ava pick the colour :lol: Your slowly adding some top stuff to your car Russ, i bet its getting active this modding thing in your house:thumbup1: My Subaru WRX - russelllinn - 11-05-2018 :lol: I think she must have, luckily its underneath so not on show ![]() The modding is getting active now, I think that will be the presents to and from us all for the fore-seeable :laugh: My Subaru WRX - Sparkystav - 11-05-2018 Some good modding going on mate, keep up the top work My Subaru WRX - russelllinn - 11-05-2018 cheers mate, slowly getting there, sorting the handling out at the moment to get it track ready
My Subaru WRX - russelllinn - 11-05-2018 Oh and Stav, what do you think teh drop in boost might be? I have been told it could be the boost solenoid, would that be right? My Subaru WRX - Asi - 11-05-2018 car is producing some good power mate. keep it up My Subaru WRX - russelllinn - 17-07-2018 got the coilovers fitted at long last as had to send one away for a new top bearing, a great improvement in handling much flatter, just got to add the H brace still as i have had to order longer bolts and my mate has had to make up some spacers for it to fit as the uprated ALK has brought the subframe down from its normal location. Pic with the TEIN coilovers on
My Subaru WRX - Sparkystav - 17-07-2018 russelllinn Oh and Stav, what do you think teh drop in boost might be? I have been told it could be the boost solenoid, would that be right? Sorry only just seen this. It could be the boost solenoid, but i'd bet its related to the mapping myself |