+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Help Topics - Submit Your Help For Other Members! (https://www.japcarforum.com/forumdisplay.php?fid=155)
+--- Thread: clicking/creaking noise on slow turning or coming to a slow stop (/showthread.php?tid=12268)
Pages:
1
2
clicking/creaking noise on slow turning or coming to a slow stop - el_bandido - 26-02-2021
gazzi123 what polybush kit would you say is needed, coming from front end?
I would say don't ever get a polybush kit because they are extremely annoying.
clicking/creaking noise on slow turning or coming to a slow stop - gazzi123 - 26-02-2021
Sparkystav Yep they're right mate.
My clutch squeaks as well, gonna try a new slave cylinder.
Yea, i would do the master cylinder....but on start up etc it is fine, but after using clutch around 5-10times then the squeek starts? so not sure if its something to do with somesort of rubber dried out or something else.
clicking/creaking noise on slow turning or coming to a slow stop - gazzi123 - 26-02-2021
Lewed_is200 Yes mate. It was bugging us for a while aswell but I will say they can be a pain to get off but nothing a hack saw wont sort lol.
Hope you sort it.
Cheers mate, the squeeks and creaking is starting to do my nut in lol , especially travelling 5hrs to cornwall!!
clicking/creaking noise on slow turning or coming to a slow stop - toxo - 27-02-2021
el_bandido I would say don't ever get a polybush kit because they are extremely annoying.
They aren't supposed to creak like yours. Mine never did and every bush on my car that I hadn't replaced with rose joints was poly, even the engine mounts!
clicking/creaking noise on slow turning or coming to a slow stop - el_bandido - 27-02-2021
I know exactly why it creaks, because they were pressed by dale_b from driftworks and it turns out he's a bit not nice