+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Home built charged is200!! (/showthread.php?tid=13867)
Pages:
1
2
Home built charged is200!! - purplewitch - 21-07-2022
Unless you have money to burn Tim I agree with Pat, extremist was very brave and stepped out on his own but he said if he blows up his car no big deal, he'll fit a new engine .. That's a huge risk for most people when there are countless other threads of successful implementations to go with .... And let's not forget poor extremist has disconnected his cos 'it was vibrating do badly it almost ripped the cradle off'
Home built charged is200!! - Sparkystav - 21-07-2022
The security screws are a five pointed star with security hole you can buy them on eBay,
Alternatively grind a slot in the screw and screw it out with a screwdriver
Home built charged is200!! - mattlaw - 21-07-2022
Or drill them out if you round them off :blushing:
Home built charged is200!! - tim996 - 22-07-2022
Ok bypass valve it is then, can you still run the ssqv with the bypass or is it a case of scrap ssqv completely?? Also how much are the mini valve new?
Home built charged is200!! - reganlives - 27-07-2022
Have you test fitted the pulley yet mate as I found one recently and noticed how they're the same size
Sent from my JY-G3 using Tapatalk 2
Home built charged is200!! - Lexuspat - 27-07-2022
U can run both but then the ssqv judt becomes noise
Sent from my GT-I9505 using Tapatalk
Home built charged is200!! - tim996 - 28-07-2022
Have test fitted pulley and had it running on tick over with charger, its the right diameter just 1 rib wider than the 5pk 790 belt im using, had to drill out the holes slightly bigger but thats it, mini bypass valve ordered, and front mount fitted so nearly there now.
Home built charged is200!! - reganlives - 28-07-2022
Perfect mate!!! Nice one!
Sent from my JY-G3 using Tapatalk 2