+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Silverstone S2K (/showthread.php?tid=14122)
Silverstone S2K - FOSSIL FUELS - 21-01-2023
Tidy fix on the cooler panel...
Its nice when a plan comes together
Silverstone S2K - Mikey - 26-02-2023
Ok update again
The boot floor was rotten so that has been cut out and a new piece welded in i have also gone around the edges with fibreglass to make sure there are no small gaps where moisture can get in. all the back end has been under sealed with a waxyol sealant, and lastnight got the subframe back in
![[Image: IMAG0959.jpg]](https://lh4.googleusercontent.com/-aJf7B05BRug/VQHvd6OqRxI/AAAAAAAAFnk/6wqYE13wgXA/w1358-h768-no/IMAG0959.jpg)
![[Image: IMAG0969.jpg]](https://lh6.googleusercontent.com/-cW-qRhKMq54/VQRD7PYR2fI/AAAAAAAAFRY/4UZGVrBln0M/w1358-h768-no/IMAG0969.jpg)
![[Image: IMAG0972.jpg]](https://lh6.googleusercontent.com/-sNVG75tkzjY/VQRJfRLb8mI/AAAAAAAAFSE/8uNUC3J8t3I/w1358-h768-no/IMAG0972.jpg)
![[Image: IMAG0974.jpg]](https://lh6.googleusercontent.com/-TQLuqMF3TwQ/VQRJmog3BiI/AAAAAAAAFSc/4HrT58_eShA/w1358-h768-no/IMAG0974.jpg)
New piece going in
![[Image: IMAG0979.jpg]](https://lh4.googleusercontent.com/-svQxBWuwkLY/VQnOiVEM-qI/AAAAAAAAFUg/8YZMSaircCU/w1358-h768-no/IMAG0979.jpg)
![[Image: IMAG1048.jpg]](https://lh4.googleusercontent.com/-UZ5aOJbNyfA/VSWDvF_lQhI/AAAAAAAAFmA/vRGB-48JTe4/w1358-h768-no/IMAG1048.jpg)
Ready for the diff
![[Image: IMAG1053.jpg]](https://lh4.googleusercontent.com/-0ZNSdc837v0/VSWEZscfPiI/AAAAAAAAFm8/p2CzBoqT1Nc/w1358-h768-no/IMAG1053.jpg)
Silverstone S2K - Sparkystav - 26-02-2023
that is rotten isnt it! good to catch it and get it repaired properly though
Silverstone S2K - johnh - 27-02-2023
Impressive amount of work! Especially to do it all on you're back in a garage, guess that's what you call commitment. I'd be moaning & groaning doing all that up on a lift:lol:
Silverstone S2K - Rabster - 02-03-2023
It's great to see work like this being undertaken and done properly so hat of to you mate
Silverstone S2K - Mikey - 03-03-2023
Thanks guys, back in the garage tonight to fit the diff and drive shafts and start putting in the new bushes in the arms.
Johnh - I think i would be f-ing and cursing if i was there all the time but try to keep it as a hobby so i enjoy it, im up there 2 - 3 times a week so if something is not going right i just lock up and leave have a think then go back at it with a different plan a few days later.
Rabs - Stav - if im going to do it i do it properly, i could of just cut the little bits out and layed some fibreglass over but if i was to sell the car it would affect the value as these s2000's are going up in price since i bought this, you can pick up a cheap example but be prepared to spend some wonga on getting it set up nice.
Silverstone S2K - FOSSIL FUELS - 04-03-2023
wont be long until its back on the roads..
keep up the good work bud.
Silverstone S2K - johnh - 05-03-2023
Nice to be able to keep it as a hobby & enjoy what you're doing! I have the pleasure of working on cars all day every day so when it gets round to doing my own two it feels more like overtime than a hobby sometimes
ad: keep up the good work, its nice to see!
Silverstone S2K - Mikey - 13-03-2023
Its getting closer
![[Image: IMAG1188.jpg]](https://lh6.googleusercontent.com/-AZ7JUw2F_Vk/VS1GgD2QguI/AAAAAAAAGJg/MxrR3O5ko3g/w1358-h768-no/IMAG1188.jpg)
![[Image: IMAG1212.jpg]](https://lh6.googleusercontent.com/-HVrWFeKpw9Y/VTkvSetI9HI/AAAAAAAAGPs/26quN6LKk3U/w1358-h768-no/IMAG1212.jpg)
![[Image: IMAG1228.jpg]](https://lh4.googleusercontent.com/-KPXdBgx5d4s/VTlLKeZ4RPI/AAAAAAAAGS0/sXvnUULQZqg/w1358-h768-no/IMAG1228.jpg)
Silverstone S2K - FOSSIL FUELS - 15-03-2023
Really impressed with the amount of work going in to the build...
Can't wait to see it back in one piece