+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150)
+--- Thread: Mazda MX5 MK3 nc handling (/showthread.php?tid=218)
Pages:
1
2
Mazda MX5 MK3 nc handling - steviewevie - 22-05-2017
I think the corporate monsters would do well to employ you as their geometry consultant Tony !
Mazda MX5 MK3 nc handling - wheels-inmotion - 22-05-2017
Lexusboy Your business would not be so good had you not spoke out Tony.
The owners of these cars know some thing is not right and your putting the car back to where these cars should be before leaving the factory gates.
I need to be fair... Between the design and build there's many alterations some of which are to tune the chassis to "simulated parameters", the reason there simulated is because domestically we have to many examples for any design engine to compute.
What normally happens is that as "disputed" situations arise the manufacturer will release revised settings that should regain the true chassis intentions i:e no tyre wear or to resolve handling complaints.
What happened with the Lexus is they didn't offer revised settings and by the time i found the problem it was to late for them to resolve without costing millions is liabilities.
The MX5 problem is bordering the irretrievable so it's fingers crossed time the problem officially goes public?