koka and his projekt - Printable Version

koka and his projekt - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: koka and his projekt (/showthread.php?tid=3049)

Pages: 1 2 3 4 5

koka and his projekt - koka - 08-01-2018

stickers do it, Smile

koka and his projekt - Asi - 08-01-2018

car looking great mate

koka and his projekt - rob - 08-01-2018

koka stickers do it,

Ah! so system is same in DE as it is in CH. If the part number is on then all is ok!! :thumbup:

koka and his projekt - Sparkystav - 08-01-2018

the Supercharger kit is interesting!

so thats the bypass by the throttle body?

koka and his projekt - koka - 08-01-2018

yes the bypassvalve is close the trotlebody, is the best solution with more space. because with the airbox from IS300 is no space there.

what think you about the solution, i am not sure about the benefits, but it works.

koka and his projekt - Sparkystav - 08-01-2018

I like the thinking.
have you tried no bypassing at all? and just using a hks SSQV?

koka and his projekt - koka - 08-01-2018

yes i tried with a pop off valve. the solution was good, but the pressure-building was not evenly

this was my first solution. it was very loud.
[Image: P231208_16.00.JPG]

then i tried this one, it was better.
[Image: DSCF2692.JPG]

koka and his projekt - koka - 08-01-2018

here is a video from dyno

http://www.myvideo.de/watch/7126962/is200_kompressor_leistungspruefstand

koka and his projekt - Lexusboy - 08-01-2018

Car looks Good KOKA:thumbup1:
I like the twins exhausts

koka and his projekt - dimis - 08-01-2018

From what i remember 240bhp