+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: is200 Kompressor (/showthread.php?tid=3063)
is200 Kompressor - Spoon - 09-01-2018
koka the standard injectors are 155ccm.
@spoon you did a mistake, the 5vz engine have the 250ccm injektors. :tongue_smilie:
sorry, my fault
here are some interesting information:
All cc/min ratings @ 3 bar/43.5 psi
23250-62030 - Gray - 1992-1993 3VZ; all
Air assisted
240cc/min
![[Image: d2325062030.jpg]](http://www.witchhunter.com/flowdatapix/d2325062030.jpg)
23250-20010 - Cyan - 1994-1997 A/T 1MZ, 1997-2001 M/T 1MZ
Air assisted
245cc/min
![[Image: d2325020010.jpg]](http://www.witchhunter.com/flowdatapix/d2325020010.jpg)
23250-0A010 - Dark Blue - 1998+ A/T only 1MZ, CA spec/2001 50 state
Air assisted (slightly larger air assist hole)
250cc/min
![[Image: d232500a010.jpg]](http://www.witchhunter.com/flowdatapix/d232500a010.jpg)
23250-50030 - Pink - 98+ 1UZ/3UZ, A/T only
Air assisted
255cc/min
![[Image: d2325050030.jpg]](http://www.witchhunter.com/flowdatapix/d2325050030.jpg)
23250-20030 or 23250-0A020 - Pink - 03+ 3MZ, A/T only
No air assist; Denso fine 12 hole type injector; 50 micrometer fuel particles
255cc/min
![[Image: d2325020030.jpg]](http://www.witchhunter.com/flowdatapix/d2325020030.jpg)
23250-46050 - Lt Blue - 93-95 2JZ-GE, CA spec; 96-97 all
Air assisted
- (non CA-spec 93-95 2JZ injectors lack air assist; 23250-46030; 315cc/min)
310cc/min
![[Image: d2325046050.jpg]](http://www.witchhunter.com/flowdatapix/d2325046050.jpg)
23250-46090 - Teal - 1998 VVT-i 2JZ-GE
Air assisted
250cc/min
![[Image: d2325046090.jpg]](http://www.witchhunter.com/flowdatapix/d2325046090.jpg)
is200 Kompressor - B15RUP - 09-01-2018
Sparkystav Thats the part Figs is developing isnt it?
I already have the mkiv calipers and their really good, but the LS400 ones are lighter
Hey Marc, I have a set of the LS400 calipers sat in the garage, going to team them up with supra TT discs and some decent LS400 pads, the calipers have been modified. :biggrin: so will go straight on. Just waiting for the current black diamond set-up to warrant replacing.
is200 Kompressor - Spoon - 09-01-2018
B15RUP Hey Marc, I have a set of the LS400 calipers sat in the garage, going to team them up with supra TT discs and some decent LS400 pads, the calipers have been modified. :biggrin: so will go straight on. Just waiting for the current black diamond set-up to warrant replacing.
What had to be changed on the caliper?
Bin for each accurate information more than grateful!:w00t:
is200 Kompressor - Sparkystav - 09-01-2018
Same question from me B15RUP whats been modified on them? you got any pics?
is200 Kompressor - Spoon - 11-01-2018
new part
is200 Kompressor - dimis - 11-01-2018
Looks nice Spoon. :thumbup1:
is200 Kompressor - rob - 11-01-2018
hey spoon - how does it work in Austria with mods like the exhaust? here in CH you need a paper for everything - i guess Austria is the same?
is200 Kompressor - dimis - 11-01-2018
rob hey spoon - how does it work in Austria with mods like the exhaust? here in CH you need a paper for everything - i guess Austria is the same?
Yes it is the same, but these guys always manage to trick the police
moke:
is200 Kompressor - abactus - 11-01-2018
Spoon new part
let the wrapping begin
is200 Kompressor - dimis - 11-01-2018
Your exhaust manifold looks great mate. So what is your next part. Jun flywheel? :Chair: