Track car : BMW M3 - Printable Version

Track car : BMW M3 - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Track car : BMW M3 (/showthread.php?tid=6092)

Pages: 1 2

Track car : BMW M3 - yemgi - 09-10-2018

And against all odds it made it to Le Mans race track :thumbup:

[Image: IMG_6027.JPG]

Track car : BMW M3 - yemgi - 09-10-2018

We had it dynoed as well, it sported a respectable 300bhp and 25lbft

[Image: DSC_0224.jpg]

Track car : BMW M3 - yemgi - 09-10-2018

Now that there is no track event planned until next year, I removed the seats and carpet and started cutting through the wiring loom a bit more Big Grin

Here is what it looked like after removing the aircon control unit and all unneeded accessories:

[Image: DSC_0227.jpg]

Here how it looked after I cut a few wires :

[Image: DSC_0236.jpg]

I then had to remove all the cut wires which made quite a mess under the dashboard :Chair:

[Image: DSC_1233.jpg]

And I removed the no longer needed fuses and relays :

[Image: DSC_1231.jpg]

What remained of the loom was the tidiedup and wrapped

[Image: DSC_1240.jpg]

There is still a bit of work to do under the dash but it is slightly better now :

[Image: DSC_1244.jpg]

Next to come:
- more wiring clean up
- removal of the water tank of the wiper washers
- removal of the aircon unit
- installation of bucket seats and harness when the leather interior is sold
- test fitting of the Schnitzer wheels
- find a way to fit the windows and hazard switches on the gutted dashboard