+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Wheels & Tyres (https://www.japcarforum.com/forumdisplay.php?fid=152)
+--- Thread: Alloy wheel fitment guide (/showthread.php?tid=6255)
Pages:
1
2
Alloy wheel fitment guide - reganlives - 07-11-2018
so if i wanted to go wider than 215 then which offset should i go for if i want for a 7.5j rim or 8j rim? I dont want the wheels sticking out too much. I have got subs in the car already so the back end probs sits a bit lower coz of the weight so gotta keep that in mind as well
Alloy wheel fitment guide - jay_russell - 07-11-2018
i run 225/30/20 et 42 8.5j rim 35mm drop and 3mm spacers all round without problems.
![[Image: IMG_0100.jpg]](http://i915.photobucket.com/albums/ac351/jay_russell_71/IMG_0100.jpg)
![[Image: IMG_0101.jpg]](http://i915.photobucket.com/albums/ac351/jay_russell_71/IMG_0101.jpg)
![[Image: IMG_0099.jpg]](http://i915.photobucket.com/albums/ac351/jay_russell_71/IMG_0099.jpg)
![[Image: IMG_0098.jpg]](http://i915.photobucket.com/albums/ac351/jay_russell_71/IMG_0098.jpg)
Alloy wheel fitment guide - ormi - 07-11-2018
because your going to run a et35 you will not need to go silly wide to fill your wheel arches a 215 40 18 will fill your arches nicely.
even if you ran a 7.5 wide rim you can still only have a 215 unless you roll the arches and that will only allow you room for a 225..
Alloy wheel fitment guide - ormi - 07-11-2018
jay has put in his post what et you req..
Alloy wheel fitment guide - ormi - 07-11-2018
the rear and the camber needed to run et35 18x8 with 215 40 18 with no arch mods
![[Image: mycaratsmc1.jpg]](http://img824.imageshack.us/img824/4717/mycaratsmc1.jpg)
if you look theirs not a lot of room left..
![[Image: mycaratsmc.jpg]](http://img833.imageshack.us/img833/7739/mycaratsmc.jpg)
Alloy wheel fitment guide - reganlives - 08-11-2018
right I think I get it now but if I get stuck again then at least I know where to come. Anyone know of any decent alloy suppliers now?
Alloy wheel fitment guide - PINGU - 20-11-2018
hi
i've just got my hands on some Works 3pc splits 17x8 front Et30 17x9 rear Et35 they sit flush with the archs and was wondering where the best to get my archs rolled and pulled
Alloy wheel fitment guide - Bandit - 21-11-2018
These are probably the best guys i know for arch work, CLICK ME?
They do travel to different areas :thumbup1:
Alloy wheel fitment guide - PINGU - 21-11-2018
yeah i've heard of them