+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: IS200 Aftermarket headunit HELP! (/showthread.php?tid=6359)
Pages:
1
2
IS200 Aftermarket headunit HELP! - Sparkystav - 22-11-2018
lexluger Well so far i can only presume that the amp bypass lead i have is somehow the problem, i noticed there are some looped wires in the big white connector (amp side) of the bypass lead, does this sound right? Does anybody have a pic of their correct lead that i can cross referance with the one i have?
Cheers..
They'll be the ones linking the 2 rear speakers each side into one output each side.
IS200 Aftermarket headunit HELP! - lexluger - 22-11-2018
i cant get any pics up at the moment as it was getting dark & i have left the lead fitted. i had a look at bandits "how to" & the lead used in his pics is differant & has no loops in the connector?
IS200 Aftermarket headunit HELP! - Rabster - 22-11-2018
the loops may not be a problem the fact you are not getting any noise at all is suspicius on its own you could check the ouputs of the radio for voltage on the audio lines using a multimeter to ensure its giving an output...
IS200 Aftermarket headunit HELP! - Sparkystav - 22-11-2018
That one will prob just have two wires going into one connector at the other end
IS200 Aftermarket headunit HELP! - lexluger - 22-11-2018
Am i right in saying that the other smaller plug stays in the amp & the plug that used to go into the back of the standard HU is no longer needed? (car has no sat-nav ) I will have a fresh look at it another day. If all else fails i'll have to buy a differant bypass lead as it must be the problem seeing as nobody else has had any issues with what should just be plug & play,
Thanks for all you help..
IS200 Aftermarket headunit HELP! - Rabster - 22-11-2018
Disconnect both from amp to play it safe