+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Project Corolla T-Sport (/showthread.php?tid=7416)
Project Corolla T-Sport - Dark Samurai - 28-03-2019
Did the next mod today, modified our standard air box, cut it all away to house our old K&N filter, went from this, where you can see the standard air box on the right hand side above the battery:
![[Image: d71399b2.jpg]](http://i1201.photobucket.com/albums/bb346/oli3107/Corolla%20T%20Sport/d71399b2.jpg)
To this:
![[Image: dab100cd.jpg]](http://i1201.photobucket.com/albums/bb346/oli3107/Corolla%20T%20Sport/dab100cd.jpg)
And ended up now, like this:
![[Image: b5c5f48c.jpg]](http://i1201.photobucket.com/albums/bb346/oli3107/Corolla%20T%20Sport/b5c5f48c.jpg)
![[Image: 7d389d05.jpg]](http://i1201.photobucket.com/albums/bb346/oli3107/Corolla%20T%20Sport/7d389d05.jpg)
The sound is magnificent when you hit the cam lift at 6,200 RPM, sounds such a good deep growl, not chavvy either!
Hope you enjoy!
Project Corolla T-Sport - Dark Samurai - 28-03-2019
I am going to matey.
Project Corolla T-Sport - ormi - 28-03-2019
either that or you buy a universal apexi filter(same pipe size as the k&n)then sell the k&n complete?? apexi filters are around £35 upwards
Project Corolla T-Sport - Dark Samurai - 28-03-2019
Yeah that's what we were going to think of doing, buying a K&N filter same size as that, and sell it complete.
Project Corolla T-Sport - is300_dino - 28-03-2019
oli you need to get the dremmel out an polish the manifold get it shiney :thumbup1:
Project Corolla T-Sport - Dark Samurai - 28-03-2019
We get about 35-37 MPG I think Dean. And yep, can get Chargers.
Rex, the manifold has a weird finish to it, it's like a crackled matte type finish, don't think it would polish up?
Project Corolla T-Sport - is300_dino - 28-03-2019
Dark Samurai We get about 35-37 MPG I think Dean. And yep, can get Chargers.
Rex, the manifold has a weird finish to it, it's like a crackled matte type finish, don't think it would polish up?
it looks like it could be machined down with a dremmel ask jason or chris, im sure they will know a trick or 2
Project Corolla T-Sport - ormi - 28-03-2019
Dark Samurai Yeah that's what we were going to think of doing, buying a K&N filter same size as that, and sell it complete.
apexi would prob be better and cheaper mate..
Project Corolla T-Sport - Sparkystav - 28-03-2019
Are you going to fill that huge hole in the top of the filter!
Project Corolla T-Sport - Dark Samurai - 28-03-2019
Yes Stav, that's for the MAF sensor, I only took pictures before the MAF sensor and all vacuum tubing was back on, but that hole isn't there now