+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150)
+--- Thread: HELP!!! Need an IS300 Radiator LIKE NOW!! (/showthread.php?tid=8173)
Pages:
1
2
HELP!!! Need an IS300 Radiator LIKE NOW!! - Rabster - 19-06-2019
what about mounting the oil cooler in one side of the bumper
HELP!!! Need an IS300 Radiator LIKE NOW!! - ormi - 19-06-2019
have you got enough room between the intercooler and the radiator??
i have looked on some web sites and have seen the 300 set ups the same as the 200's...auto cooler wise
HELP!!! Need an IS300 Radiator LIKE NOW!! - Sparkystav - 19-06-2019
MPunted the cooler behind the fog lights
HELP!!! Need an IS300 Radiator LIKE NOW!! - Phil01 - 19-06-2019
that is an auto trans fluid cooler, just under exhaust manifold by the alternator, it is held to the cylinder block by 2x12mm bolts.
Stupid thing is in the way when you have to replace the thermostat.
HELP!!! Need an IS300 Radiator LIKE NOW!! - jimxms - 19-06-2019
Phil01 that is an auto trans fluid cooler, just under exhaust manifold by the alternator, it is held to the cylinder block by 2x12mm bolts.
Stupid thing is in the way when you have to replace the thermostat.
So its an OEM part mate?
If so, they must have changed the design of the cooler for the UK market as all USA IS300's have it plumbed into the radiator. Maybe even UK IS200's do as well?
At least this means I dont have to be anywhere near as picky when buying a new radiator.