+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Lamb's is200 (/showthread.php?tid=8469)
Lamb's is200 - lookatmybiceps - 23-07-2019
just a bit of a joke on most forums and xbox live i cant have kyle and i find it boring puting kyle1234 or something similar so, just thought i would be funny to use that name i was like 16 at the time and i just decided to keep using it and it is a name thats never already used, ever and when i join a new club, yaris,celica,sxoc, most people have seen my name an figure its me, lol
Lamb's is200 - ormi - 23-07-2019
aaa i see so your not a body builder then?
Lamb's is200 - lookatmybiceps - 24-07-2019
its been an event full day, car decided to run in limp mode, wouldnt go over 3k rpm, then it cut out on a hill as i was turning a corner and wouldn't start again, so i had to roll backward and get out of the way, and had no brakes only hand brake, then my gauge started spazing out and making a ticking noise, i checked everything all was fine disconected the battery, check ecu chip and clamped them again, then it was fine, WTF hope it doesn't happen again randomly!
Lamb's is200 - lookatmybiceps - 24-07-2019
supercharger shine
![[Image: 307176_10150785987900500_574495499_20503...4932_n.jpg]](https://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/307176_10150785987900500_574495499_20503155_2184932_n.jpg)
and badge-less
![[Image: 308355_10150785989700500_574495499_20503...3939_n.jpg]](https://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/308355_10150785989700500_574495499_20503180_5823939_n.jpg)
Lamb's is200 - Sparkystav - 24-07-2019
Connect the FCD by soldering rather than them clips. them clips are so unreliable
Lamb's is200 - lookatmybiceps - 24-07-2019
yeah i will do at some point, just hope its not anything else but ive driven a bit since then so if somthing was wrong ecu light would come on straight away, was just lucky i had my tools in the boot.
Lamb's is200 - ormi - 24-07-2019
I'll be bringing my gas soldering iron with me to jar if you want to do it then?
Lamb's is200 - lookatmybiceps - 25-07-2019
thanks for the offer ormi but im not going,
ok quick question, the needle on gauge is a 20psi vacuum and moves smoothly, when the car heats up on a long drive at idle the needle is at 13psi but jumping from 12-13, dose this happen when it warms up or is it just cause its a cheapish gauge, also my mates in his 200sx dose it but not as bad, but mine makes a ticking noise when its doing it can get quite annoying if not got music on. any ideas? is everything working fine?
Lamb's is200 - lookatmybiceps - 25-07-2019
ps just wanna make sure it the gauge and not my car doing something strange.
Lamb's is200 - Sparkystav - 25-07-2019
i doubt its pulling 13psi vacuum, that scale will prob be in mmHG (random i know)
it sounds fine though, as for the ticking that'll be the stepper motor in the gauge and its because its a reasonably cheap gauge.
Cant beat a mechanical decent brand boost gauge IMHO (Greddy for example)