+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Anyone near Wickford got a 22mn box wrench (/showthread.php?tid=8578)
Anyone near Wickford got a 22mn box wrench - Dark Samurai - 06-08-2019
How much of a gap is there?
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
About 25cm
Anyone near Wickford got a 22mn box wrench - Dark Samurai - 06-08-2019
Don't think it will...
Anyone near Wickford got a 22mn box wrench - Phil01 - 06-08-2019
it won't fit it that gap mate with the socket on the end as that adds another 30mm
Anyone near Wickford got a 22mn box wrench - Dark Samurai - 06-08-2019
Dad do you have a socket thingy
Anyone near Wickford got a 22mn box wrench - Dark Samurai - 06-08-2019
Stepped ring spanner.
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
Or is there any way to jam the alternator so I can just get a breaker bar on it without it spinning?
Anyone near Wickford got a 22mn box wrench - Phil01 - 06-08-2019
you could try it with the drive belt still on due to friction of belt it might stop it turning.
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
Just tried that, no luck
Either slips or rotates
Anyone near Wickford got a 22mn box wrench - jimxms - 06-08-2019
I effin quit. Cars going back together