![]() |
|
Mr2 Speedo not working - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: General Car Maintenance (https://www.japcarforum.com/forumdisplay.php?fid=150) +--- Thread: Mr2 Speedo not working (/showthread.php?tid=9165) Pages:
1
2
|
Mr2 Speedo not working - Chris0121 - 08-10-2019 Tried pressing the thing in and still nothing think it's time to start checking the cable joy Mr2 Speedo not working - todd - 08-10-2019 Cable is a 2 part affair, if the back section pretty easy, front section is a bit of a pain. Could also be the plastic cog that goes into the gear box. Mr2 Speedo not working - Chris0121 - 08-10-2019 I'm hoping it's the trip reset button thing cos the second I pressed that in it stopped working so hopefully it'll be the join on the back of the clocks luckily I have 3 days off next week to check it Mr2 Speedo not working - toxo - 08-10-2019 I'd expect it to be in the dials, bit of a coincidence otherwise! Mr2 Speedo not working - Chris0121 - 08-10-2019 Yh exactly what i thought Mr2 Speedo not working - Chris0121 - 16-10-2019 Ok so not very happy on my way to work and the temp gauge suddenly started climbing I slowed down to around 20 and it suddenly dropped and started climbing back up to the middle where it normally does I think my clocks are broken just go to work out what rev mine is as I've found a set of clocks on eBay for pennies it was first registered march 91 if this helps anyone figure it out it stuck grrr Mr2 Speedo not working - toxo - 16-10-2019 What's your frame number? Mr2 Speedo not working - Chris0121 - 16-10-2019 I'll have to check tomorrow where's the frame number stamped is it in the spare tyre well Mr2 Speedo not working - toxo - 16-10-2019 It's on the plate on the front bulkhead yeah - also stamped into the bulkhead between the frunk and the cabin, frunk side, top left. Mr2 Speedo not working - Chris0121 - 16-10-2019 Ok I'll check in the morning |