+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Little write up on the evolution of my car (/showthread.php?tid=645)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
Little write up on the evolution of my car - dimis - 21-12-2017
Sparkystav I think the red thin ones to the side are TOMS ones,cause i dont think the cusco ones have the "X" piece
You maybe right mate. from the colour it seems to be Tom's braces
Little write up on the evolution of my car - Sparkystav - 21-12-2017
ormi nooooooooooo :crying: cant the metal wizzard moley take mesurements??then you wont have to cut them up??then i can buy it off you??:thumbup1::lol:
Well if im only cutting the top bars off. angling the corners and fitting them back again.
Ive got some measurements taken already for moley. just need to put them in a proper drawing.
Little write up on the evolution of my car - ormi - 21-12-2017
aa so your just modding yours slightly....
Little write up on the evolution of my car - Sparkystav - 21-12-2017
thats the idea mate
Little write up on the evolution of my car - ormi - 21-12-2017
i see i see oh well off to look for under bracing now!!:blink::lol:
Little write up on the evolution of my car - rig-pig - 24-12-2017
hi stav i enjoyed seeing your car in the mag after being away from the LOC site for a while
Little write up on the evolution of my car - micromarc - 05-01-2018
Surprised your having so many problems with them mate, anyone that's seen my car will know how low it is and mine scrape sometimes but haven't caused me any other problems.
Little write up on the evolution of my car - Sparkystav - 05-01-2018
i think its just that im not used to them and need to slow down on some things a bit?
Little write up on the evolution of my car - Bandit - 05-01-2018
How's the mod list going mate? has it gone down on things to do or is it still getting bigger :biggrin:
Little write up on the evolution of my car - Sparkystav - 05-01-2018
Started my gauge pod adjustment as well the past couple of days:
this is what it was:
![[Image: DSC_0262.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/write%20up/DSC_0262.jpg)
But i have at least a couple of new gauges now so need some more space.
Started with this pod:
![[Image: 08_tripledashdome_ebay.jpg]](http://images.channeladvisor.com/Sell/SSProfiles/43000424/Images/1/08_tripledashdome_ebay.jpg)
trimmed the edges off it and gave the bottom a slight curve.
Then taped it to the old holder and siliconed the inside edges to hold it in place.
Once that dried i filled around the edges roughly and now its down to sanding it back and then refilling till its nice and smooth.
Filled VERY roughly:
![[Image: DSC00543.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/DSC00543.jpg)
![[Image: DSC00544.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/DSC00544.jpg)
The filler im using:
![[Image: DSC00545.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/DSC00545.jpg)
and the paper (plus some grades in between):
![[Image: DSC00546.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/DSC00546.jpg)
I'm now at the stage of spraying it with hi build primer to get a nice base for the final black