![]() |
|
Jimbobs Lexus IS200 Turbo! - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156) +--- Thread: Jimbobs Lexus IS200 Turbo! (/showthread.php?tid=7339) Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 06-10-2020 wonder if someone can help what is the best spark plugs to use with the turbo setup i see all these grades and i remember a lil debate going on just cant find the thread? Jimbobs Lexus IS200 Turbo! - S - 06-10-2020 how much boost? Jimbobs Lexus IS200 Turbo! - S - 06-10-2020 Here you are: http://www.outlawjapclub.co.uk/forum/showthread.php?p=198899#post198899 Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 06-10-2020 not sure what boost but gonna be aiming for 350bhp min mate thanks for the link
Jimbobs Lexus IS200 Turbo! - Sparkystav - 06-10-2020 Just get the same as me, a grade colder thank standard, not expensive, and work. Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 24-10-2020 Right a little update! I bought a few odds and sods like the sports pedals and door sills they should be delivered sometime this week Paid deposit on my manifold and downpipe (Many Thanks IKE) Reverse dip mirrors module Cant remember what ive actually got getting delivered Still not got hold of the injectors but money holding me back at present need pay day to come!!! Next updates will be the actual build and loads of photos will be uploaded maybe few vids take care all!! Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 01-11-2020 Right a little update went to fit the head studs today and hit a problem straight away i didnt realise that the ARP studs from the surpra had to be the mains ones for the head on the 1GFE engine so i got another set order and they will be on there way tomorrow! Also today checked the block over as its been 5 months since ive seen it so give it the once over and scraped any old gasket or muck off the top and bottom, also cleaned my threads out. Tomorrow i will be fitting the mains ARP studs and bearing so the crank shaft can be installed. After this i will get the pistons in with the new bearings and rings and start on a few ancillaries. Ill get lots of photos so watch this space not the best of starts i know but its never plain sailing lmao Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 04-11-2020 right what ive got done so far: Fitted my new door sills Started on my 3x pod for gauges ![]() ![]() Fitted the new bearing and crankshaft with the ARP studs (for anyone wanting to do this is is a 12 point 12mm socket that is required) ![]() ![]() ![]() ![]() Got pistons going in but a big boo boo ring compressor broke and so did a piston ring so ordered a new set and a bit better compressor i stayed very calm honest!!! started fitting the timing belt casing and the rearoil seal retainer All have new gaskets and seals Next couple of days im going to fit these: Oil strainer Oil cooler Knock sensors Oil dipstick guide support Water outlet pipe Jimbobs Lexus IS200 Turbo! - Sparkystav - 04-11-2020 Keep the pictures coming mate! Jimbobs Lexus IS200 Turbo! - Jimbob-T-Lex - 04-11-2020 Will do mate! |