+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: another is200 project (/showthread.php?tid=11683)
another is200 project - john wan - 30-03-2022
So had a few issues since I was here last turns out the braided lines I bought were not fit for purpose so I had a fuel leak from my fuel return and also the oil feed for the turbo now both fixed with more rubber hose I don't want this type of leak again so ive decide that im gonna fit solid lines so got all the ends turn up just need the benders to arrive ( ive heard the jokes from that comment all ready) an then I can make them up
![[Image: 20140511_114206_zpsijyb5j8g.jpg]](http://s822.photobucket.com/user/johnwan_bucket/media/20140511_114206_zpsijyb5j8g.jpg.html)
another is200 project - el_bandido - 01-04-2022
Copper pipe is quite easy to bend by hand. I made myself a new line from the brake block to the master cylinder just using my hands and a bit of care. Might save you a few quid?
another is200 project - john wan - 01-04-2022
Yeah was lookin at that but ive got me a bender now
another is200 project - john wan - 03-04-2022
So first time flareing and such like so hasnt turned out to bad I think just hopefully wont leak and set fire to the car
![[Image: 20140515_192519_zps4nxtdfts.jpg]](http://s822.photobucket.com/user/johnwan_bucket/media/20140515_192519_zps4nxtdfts.jpg.html)
another is200 project - Sparkystav - 03-04-2022
Looks a tidy job!
another is200 project - Tosh21 - 03-04-2022
done a pretty good job on that mate! is it oil feed for the turbo?
another is200 project - john wan - 04-04-2022
Yeah its the feed the rubber hose I had fitted had decided to go hard and crack an start leaking onto the turbo so had to chainge it hopefully have some pickys up soon of a new manifold soon as im in the process of making mark 2
another is200 project - john wan - 27-04-2022
Right after being told before I made the hard line oooo I probably won't do that put bad thoughts in mah head so I found a place to make me a propper crimped ended oil feed pickys will be up soon
another is200 project - el_bandido - 30-04-2022
Can you make manifolds for the is200?
another is200 project - john wan - 30-04-2022
Well I like to play around with my welder bud im in the process of making another one for mine its not gonna look pretty but should work fine why?