![]() |
|
My new toys - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156) +--- Thread: My new toys (/showthread.php?tid=725) Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
My new toys - edeath - 20-10-2017 Sparkystav you should of had a word with Edeath mate, lol i wondered what that screwed in block was all about!! My new toys - dimis - 20-10-2017 Today I visited my mechanic after work to fit the Tanabe rear strut bar and the Ultra Racing under bars. Firstly we replaced the under bars (Stav you were correct, Lexus has fitted OEM bars). The first thing I noticed is the Ultra bars look stiffer and stronger in compare to OEM. Furthermore the bars have roughly the same weihgt with the OEM bars. Here are some pics of the OEM and the Left and Right Ultra bars fitted on the car. The fitments was very easy just remove the two screws that hold the bar. OEM Bar Right Bar ![]() Left Bar ![]() Once the Ultra bars were fitted on the car it was time to install the Tanabe rear strut. For this job is used a dimond core drill. I took of the strut edge base and fitted on the car to see where to drill the hole. Also kept the car lifted during installation so the that the load of the upper mounts shocks is relieved and balanced out. Once the bar was installed on the car the preload can be adjusted and set. After the bar is bolted and the car is lowered each shock will have equal load and will prevent independent movements of each shock. ![]() ![]() ![]() ![]() ![]() So once all the parts were fitted it was time to go for a ride. First impressions was that the car fills more solid. Next impression was the steering responce improved and lastly the handling was improved. My new toys - dimis - 20-10-2017 Gord nice one mate :thumbup: what you getting for christmas ? The Chicane rims mate. My new toys - dimis - 20-10-2017 One more pic:
My new toys - Moley - 20-10-2017 That looks very good, so does this means you wont want the ones I make up ??? And also the strut brace , how much room in the boot do you think you have lost ?? My new toys - Bandit - 20-10-2017 dimis One more pic: Looking good mate, but you do know you wont be able to get any ski's through the ski hatch now :laugh::laugh:
My new toys - dimis - 21-10-2017 Bandit Looking good mate, but you do know you wont be able to get any ski's through the ski hatch now :laugh::laugh: I am not good with ski, so i do not mind :lol: My new toys - dimis - 24-10-2017 Someone asked if there is any difference with the Ultra bars. Well I took the car for a good drive today and I noticed that the car handling is much better. All reactions of the car are quicker and the car gives a good safety feeling during corning, braking and when passing over anomalous road surface. Well I have fitted also the rear strut bar so i cannot say if the Ultra bars only do a good job or the rear strut bar or both! My new toys - Moley - 24-10-2017 Well that is good news dimis . Once I get the bars made up and other members get them fitted they will be able to say if just the bars make a difference on their own. My new toys - dimis - 24-10-2017 Moley Well that is good news dimis . Once I get the bars made up and other members get them fitted they will be able to say if just the bars make a difference on their own. Ok mate, it will be interesting to here the opinion of other members :thumbup: |