+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Morning peeps !!!!!! (/showthread.php?tid=3988)
Morning peeps !!!!!! - is300_dino - 21-03-2018
Dark Samurai fcd only need a screwdriver dont they?
yes just looked at a picture of the hks fcd and looks like you just need a screw driver or something flat bladed maybe even a cred it card will work
Morning peeps !!!!!! - is300_dino - 21-03-2018
Phil01 I think she meant mm i.e millimetres
And no way will halfords or any DIY store will have that size, need a specialist tool shop, that's if that size is available.
so is this for getting into the box the controller is in???
Morning peeps !!!!!! - steviewevie - 21-03-2018
Yeah I presume you mean to open up the ECU box to get to the FCD. Do you know what setting they put it on ? Does it not seem quite right ?
Morning peeps !!!!!! - steviewevie - 21-03-2018
Just tried on mine, and a 10mm socket worked fine to open up the ECU box.
Morning peeps !!!!!! - h11exx - 21-03-2018
its on setting 8 thought of trying it on 10
Morning peeps !!!!!! - is300_dino - 21-03-2018
h11exx its on setting 8 thought of trying it on 10
seem to remember gord recommending going higher than 9 so try 10 and see how that works.
Morning peeps !!!!!! - h11exx - 21-03-2018
if i can get into the box lol
Morning peeps !!!!!! - is300_dino - 21-03-2018
can you borrow one from a neighbour?
Morning peeps !!!!!! - steviewevie - 21-03-2018
Yeah be careful not to go too low. The lower the setting, the more the FCD is lying to the stock ECU, and the bigger the risk of going too lean.
Morning peeps !!!!!! - steviewevie - 21-03-2018
On an off-topic note, anyone noticed the new forum feature on the forum index page (at the top) ?