+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: Help, double din dose not fit in fascia (/showthread.php?tid=6011)
Help, double din dose not fit in fascia - ormi - 27-09-2018
here you go mate....as stav says no cage........
![[Image: dash1acopymodwithtext.jpg]](http://img209.imageshack.us/img209/848/dash1acopymodwithtext.jpg)
Help, double din dose not fit in fascia - ormi - 27-09-2018
sorry por the cr@p drawing im p00p at that type of stuff...
Help, double din dose not fit in fascia - Moley - 27-09-2018
Well I dont think I have any of them bits, my fascia was bought about 5 years ago and I have no idea where the bits are now. Also I've cut the fascia up now, ie. the bottom straight part and the bottom brackets . LOL
Help, double din dose not fit in fascia - steviewevie - 27-09-2018
Time to go back to eBay, methinks :Fish:
Help, double din dose not fit in fascia - Moley - 27-09-2018
this one .........
http://cgi.ebay.co.uk/LEXUS-200-300-CD-STEREO-RADIO-FASCIA-FACIA-KIT-IS200-/250666907542?pt=UK_CarsParts_Vehicles_FasciaPlates_SM&hash=item3a5ce97796
or the more £££££££££ one
http://cgi.ebay.co.uk/LEXUS-IS300-IS200-2001-2004-CD-Stereo-Fascia-Panel-/270643336934?pt=UK_CarsParts_Vehicles_FasciaPlates_SM&hash=item3f039996e6
Wish you,s said before I attacked it with the Blade LOL
Help, double din dose not fit in fascia - steviewevie - 27-09-2018
Moley this one .........
http://cgi.ebay.co.uk/LEXUS-200-300-CD-STEREO-RADIO-FASCIA-FACIA-KIT-IS200-/250666907542?pt=UK_CarsParts_Vehicles_FasciaPlates_SM&hash=item3a5ce97796
or the more £££££££££ one
http://cgi.ebay.co.uk/LEXUS-IS300-IS200-2001-2004-CD-Stereo-Fascia-Panel-/270643336934?pt=UK_CarsParts_Vehicles_FasciaPlates_SM&hash=item3f039996e6
They're both the same item, so the cheaper one sounds best ! :biggrin:
Quote:Wish you,s said before I attacked it with the Blade LOL
Wish you'd asked why it didn't fit before you attacked it with the blade :laugh:
Help, double din dose not fit in fascia - Moley - 27-09-2018
ormi here you go mate....as stav says no cage........
In the pic do you need to remove both the horizontal parts ie the middle and bottom one or just the middle one ?
I dont want to muck :wink: it up again
Help, double din dose not fit in fascia - steviewevie - 27-09-2018
Moley In the pic do you need to remove both the horizontal parts ie the middle and bottom one or just the middle one ?
I dont want to muck :wink: it up again
Just the middle one should suffice. It might depend on your actual head unit, e.g. if you have a screen that tilts up then maybe it could get stuck on that bottom bit.
So just cut out the middle bit and hopefully it'll fit with that. If not, you might need to take off the bottom bit, but don't get rid of those bottom brackets !
Help, double din dose not fit in fascia - Moley - 27-09-2018
OK so has anyone got the inserts that they did not use ??
Went the super glue way, now all thats needed is the insert bits for the holes
Help, double din dose not fit in fascia - ormi - 27-09-2018
i had to cut out the middle and the bottom mate.....my screen tilts and folds out and it couldnt do thal with the lower part in place and when built up even though theirs no bottom bar their is still only a tiny gap..