![]() |
|
Generic Push Start Button & Proximity Entrance - Printable Version +- JapCarForum (https://www.japcarforum.com) +-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11) +--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151) +--- Thread: Generic Push Start Button & Proximity Entrance (/showthread.php?tid=6551) |
Generic Push Start Button & Proximity Entrance - Lexuspat - 22-12-2018 looks like alot of work but I think its worth it for the end result Generic Push Start Button & Proximity Entrance - SHAHZ - 22-12-2018 Nice work Rabs ![]() @asi, Rabs has done his with a clifford! Rabster Ok well we have success Generic Push Start Button & Proximity Entrance - Rabster - 22-12-2018 The push start button will work with any car. The standard lexus immobiliser will get in the way but we are working on this as no one will want to loose security Generic Push Start Button & Proximity Entrance - Carpediem - 22-12-2018 could you not bypass the issue by getting an is220 security module or is it all inbuilt to the ecu? they all have push button start and proximity sensor entrance anyway so would cut back on alot fo the issues your having? and keep it pretty oem? Generic Push Start Button & Proximity Entrance - parthiban - 22-12-2018 I'm not sure if it would work but I'm guessing getting the full OEM Toyota kit would be seriously expensive........... How did the my.is guys get around the immobiliser or have they just put a key in the steering column like before? Generic Push Start Button & Proximity Entrance - Carpediem - 22-12-2018 surely theres an aftermarket version? or is that jsut alarms ystems and not imobilisers? i dont much about this but like to feel included
Generic Push Start Button & Proximity Entrance - Rabster - 22-12-2018 Carpediem could you not bypass the issue by getting an is220 security module or is it all inbuilt to the ecu? i have spent many months looking over this and there is no easy way to combine the system from a 200 to a 220. plus the cost for the modules form a breakers outweighs the cost of doing the work for example this system that is after market is universal so not limited to the one brand of car, i will be retrofitting to other makes also.... the push start works with any brand of car you just have to disable the factory immobiliser but if you add your own immobiliser to this system then you are laughing this can be done using relays and being well hidden in the car wiring loom to deter thief's or you can even buy a immobiliser harness to add in... As for the proximity this works in conjunction with the push start or as a unit on its own, in my case it will be used to control the entrance to the car via an after market alarm for me this will be done using a relay and 2 diodes (full details will be posted upon completion...) once installed there is no reason to think this unit isnt OEM as if installed correctly and not rushed it will be the dogs nutz Generic Push Start Button & Proximity Entrance - Rabster - 22-12-2018 parthiban I'm not sure if it would work but I'm guessing getting the full OEM Toyota kit would be seriously expensive........... the genuine system is mega expensive and not easily linkable to older generation cars The my.is guys have removed the steering column lock and then sacrificed a key removed the transponder and stuck to the transponder RX. i should think they have installed a Immobiliser system not sure if the proximity comes with anything will have to check.... Generic Push Start Button & Proximity Entrance - parthiban - 22-12-2018 What does an immobiliser actually do? Surely the proximity sensor is itself an immobiliser as the engine won't start without the fob nearby? Generic Push Start Button & Proximity Entrance - Rabster - 22-12-2018 the proximity will allow you entrance to the car so in effect yes it will act as a kind of immobiliser in the fact you still nee to get into the car the immobiliser stops the engine form cranking some models also stop the acc from turning on |