+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My Toyota MR2 build thread - 1994 GT-S (/showthread.php?tid=481)
My Toyota MR2 build thread - 1994 GT-S - mbland - 22-01-2018
the uk plate does fit quite nicely in that location i used to run mine either there or just cable tied it into the mesh for going to and from shows and stuff
My Toyota MR2 build thread - 1994 GT-S - russelllinn - 22-01-2018
UK plate looks best there and least you know you're not gonna get done again too, plate tilter sounds good as well though as it could then be mounted up in the bumper recess?
My Toyota MR2 build thread - 1994 GT-S - toxo - 22-01-2018
The reason I don't wanna use a plate tilter is because I don't wanna get nicked again! I'm doing the Miss Banzai tunnel run next weekend and London will be crawling with police.
I thought about making L shaped brackets to attach the plate in the space in the bumper but I'd rather not get anything else in the way of the rads TBH, the crash bar already covers half the radiators and it's got the chargecooler rad in the way as well...
My Toyota MR2 build thread - 1994 GT-S - lexynik - 27-01-2018
put a little servo on the plate tilter like the mobike boys use to f**k off the cameras,that way it wont tilt unless you want it to
My Toyota MR2 build thread - 1994 GT-S - toxo - 01-02-2018
lexynik put a little servo on the plate tilter like the mobike boys use to f**k off the cameras,that way it wont tilt unless you want it to
See my message above... The whole point of doing this is NOT to get nicked!
My Toyota MR2 build thread - 1994 GT-S - lexynik - 01-02-2018
toxo See my message above... The whole point of doing this is NOT to get nicked!
yes mate i got that part-thats why i said put a servo on it so its fixed solid in the legal position but can be tilted for shows etc
My Toyota MR2 build thread - 1994 GT-S - FirebirdPhil - 01-02-2018
I would just go with what we have, tie-wrapped in place in the mesh, then removed for the shows.
My Toyota MR2 build thread - 1994 GT-S - toxo - 01-02-2018
That would require me to have some mesh
I like the exposed rad look (close as I can get to a dirty big FMIC) and a year and a half on it hasn't had a stone through it yet! I think I am going to go for the last of my 3 photos. Thanks for everyones suggestions 
My Toyota MR2 build thread - 1994 GT-S - Dan_Turism0 - 01-02-2018
toxo That would require me to have some mesh
thats the kiss of death
My Toyota MR2 build thread - 1994 GT-S - FirebirdPhil - 01-02-2018
toxo That would require me to have some mesh
Ha your ducked now you've tempted fate.