+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Bandit's Supercharged IS200 take 2 :-) (/showthread.php?tid=5114)
Bandit's Supercharged IS200 take 2 :-) - DaveEdin - 17-02-2019
Good stuff Chris
How much did you pay for the TRD lip then? 
Decent bargain?How much power increase would you expect from the bigger pulley?
Bandit's Supercharged IS200 take 2 :-) - Moley - 17-02-2019
I was going to say about the bigger pulley .
Once you fit it mate give me a shout as to how you get on with it and I might do the same if you say its any good.
And well done on getting the rear lip :thumbup::thumbup:
Bandit's Supercharged IS200 take 2 :-) - Bandit - 17-02-2019
The original TTE pulley is 130mm and the new one is 160mm so a bit bigger, think the one Dimis has at the moment is 145mm and his is putting out around 240-250bhp with other mods? so not sure how much difference this one will give compared to the 145mm? but should be a bit more??
@Dave, not a lot for the rear skirt mate :p:p :lol:
Bandit's Supercharged IS200 take 2 :-) - Lexuspat - 17-02-2019
well done on the rear lip
and hope the new pulley gives you abit more on the power front
Bandit's Supercharged IS200 take 2 :-) - ormi - 17-02-2019
Don't think theirs any more bigger pulleys left Moley...gord had 3 bandit got one I got one and posty got the other...
Can't wait to get mine...
What else you fitting along with the pulley?or you just going to run the pulley first and see how it goes?
Bandit's Supercharged IS200 take 2 :-) - Moley - 17-02-2019
ormi Don't think theirs any more bigger pulleys left Moley...gord had 3 bandit got one I got one and posty got the other...
Can't wait to get mine...
What else you fitting along with the pulley?or you just going to run the pulley first and see how it goes?
Oh so it like that is it :Shooting:
Bandit's Supercharged IS200 take 2 :-) - Bandit - 17-02-2019
ormi Don't think theirs any more bigger pulleys left Moley...gord had 3 bandit got one I got one and posty got the other...
Can't wait to get mine...
What else you fitting along with the pulley?or you just going to run the pulley first and see how it goes?
Going to try it first mate to see how it reacts, then probably go the same way that Dimis has with his, e-manage etc? going to measure the belt when i get back from work tomorrow so will let you know which one i go for? :thumbup1:
Bandit's Supercharged IS200 take 2 :-) - ormi - 17-02-2019
I was going for that idea too...gord says his ran fine with the pulley....woop woop
More bbbbbooooooooosssssssstttttt.
Bandit's Supercharged IS200 take 2 :-) - Bandit - 17-02-2019
ormi I was going for that idea too...gord says his ran fine with the pulley....woop woop
More bbbbbooooooooosssssssstttttt.
Will let you know about the belt mate, so you can get the right one without trying different sizes :thumbup:
BBBBBOOOOOOOOOSSSSSSSSSTTTTTTT
iscoStu:
Bandit's Supercharged IS200 take 2 :-) - dimis - 17-02-2019
Bandit The original TTE pulley is 130mm and the new one is 160mm so a bit bigger, think the one Dimis has at the moment is 145mm and his is putting out around 240-250bhp with other mods? so not sure how much difference this one will give compared to the 145mm? but should be a bit more??
@Dave, not a lot for the rear skirt mate :p:p :lol:
It is a 150mm mate, not 145