+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My New IS V8 Build (/showthread.php?tid=2780)
My New IS V8 Build - Asi - 09-03-2018
leaving the fogs on. they will sit right next inbetween the fog lights and the intercooler behind the mesh.
My New IS V8 Build - Asi - 09-03-2018
more pics i just found on the phone
![[Image: ecf9f43e.jpg]](http://i166.photobucket.com/albums/u95/asi-ebb/ecf9f43e.jpg)
![[Image: 1402a368.jpg]](http://i166.photobucket.com/albums/u95/asi-ebb/1402a368.jpg)
My New IS V8 Build - lexynik - 10-03-2018
looks like its gonna be an absolute animal - good stuff asi
My New IS V8 Build - dimis - 10-03-2018
I like the new look of the TTE bumper Asi. Bigger hole for the FMIC and also smarter :thumbup1:
My New IS V8 Build - Asi - 10-03-2018
Thanks Dimis. it does look a lot better.
Today. a mock propshaft was made using the one that came with the car and the front bit of the 7mgte prop was cut and welded on to the original prop so and got it all lined up and fitted to the car now its sent away to get one made.
My New IS V8 Build - ormi - 10-03-2018
asi mate i've not had the bottle to cut my bumper yet!!!poopin my pants!!i will do it though!!need to find a blade thats good enough to trim the crash bar!!!!
i was going to leave a small lip on mine just were the plate is the now so i can keep the plate in the middle of the bumper....
were you mounting your plate?
My New IS V8 Build - Sparkystav - 10-03-2018
ormi asi mate i've not had the bottle to cut my bumper yet!!!poopin my pants!!i will do it though!!need to find a blade thats good enough to trim the crash bar!!!!
i was going to leave a small lip on mine just were the plate is the now so i can keep the plate in the middle of the bumper....
were you mounting your plate?
Its actually eary to do.
i moved my plate to the side the other day and cut the full front out of the bumper, cut it with a sharp scalpel and then sanded it down
My New IS V8 Build - Moley - 10-03-2018
ormi asi mate i've not had the bottle to cut my bumper yet!!!poopin my pants!!i will do it though!!need to find a blade thats good enough to trim the crash bar!!!!
i was going to leave a small lip on mine just were the plate is the now so i can keep the plate in the middle of the bumper....
were you mounting your plate?
If you want some 1mm thick 5" cutting discs for cutting the crash bar Ormi, I could send you some.
My New IS V8 Build - Asi - 10-03-2018
like stav said its very easy to do mate. i think i took matter of 5 minutes for Amjed (mechanic) to cut it
My New IS V8 Build - ormi - 10-03-2018
Moley If you want some 1mm thick 5" cutting discs for cutting the crash bar Ormi, I could send you some.will that cut the alloy bar matey??try'd a few disks and well it didn't go well over ten mins to cut a 1 inch slot(crash bars alloy)!!!!!was not happy!!so gave up..:crying::crying:
if you could send me some that would be amazing matey :thumbup::thumbup::thumbup:....