Stix's IS200 - Printable Version

Stix's IS200 - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Stix's IS200 (/showthread.php?tid=10506)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Stix's IS200 - Ste176 - 11-02-2021

Can't wait to get these on mate Smile

lets get the car back up to it's old standard Big Grin

Stix's IS200 - S - 11-02-2021

Ste176 Can't wait to get these on mate lets get the car back up to it's old standard

Definitely! Wheels sorted + paint sorted = win.

Stix's IS200 - S - 16-02-2021

UPDATE:

Got my wheels back:

[Image: IMAG0467_1.jpg]

Test fitted:

[Image: e930f873-eaf9-42de-b9da-fb06b041e43e.jpg]

[Image: c3d572dc-4dd2-447e-9402-6cb7166832fb.jpg]

Also fitted a standard mid-pipe and started my fuel return line.

I drilled a hole in the top of the fuel "tower" fitted a AN bulkhead fitting and then crushed shut the standard FPR thing and ran a hose from the bulkhead fitting to the jet pump thing.

Then I removed the fuel rail and injectors and fitted a AN fitting the fuel rail and a 180 AN fitting to that.

I then removed the seals from the standard injectors, fitted them to the new injectors, fitted the injectors to the fuel rail and both of those to the car!

[Image: IMAG0481_BURST002.jpg]

I deleted the coolant feed to the TB

Then it got dark so I went in.

All of that while "helping" to fit coilovers to a mates MX5! Haha

I need to run some hose from the fuel rail to the FPR and then from the FPR to the tank and it'll be finished Smile

Then I'll be able to start on the heat shield.

OH and I'm going to order tyres for the BBS tomorrow Smile

Stix's IS200 - Ste176 - 16-02-2021

Another epic day had by sxe Smile

Looking forward to the bbs being fitted mate Smile

they looked sick when we first trailed them!

Stix's IS200 - Sparkystav - 16-02-2021

LOL a busy day mate!

did you measure the standard fuel pressure before to figure out what to set the FPR to? (Its 50psi just in case lol)

Stix's IS200 - Is250Brad - 16-02-2021

Loving those rims mate

Stix's IS200 - S - 16-02-2021

Sparkystav LOL a busy day mate!

did you measure the standard fuel pressure before to figure out what to set the FPR to? (Its 50psi just in case lol)

Hahahaha I did not measure the fuel pressure Lolz!

Stix's IS200 - S - 16-02-2021

Ste176 Another epic day had by sxe

Looking forward to the bbs being fitted mate they looked sick when we first trailed them!

Thanks Ste Smile

Stix's IS200 - S - 16-02-2021

Is250 lad Loving those rims mate

Thanks mate Smile

Stix's IS200 - S - 18-02-2021

Well today was not as productive as I'd of liked.

I fitted the FPR to the bulkhead:

[Image: IMAG0485.jpg]

^doesn't look straight in the picture but it is! Haha

I used one bolt hole that was already there and drilled another through the plate on the bulkhead.

I washed the car and that's it!

I'm waiting for parts! Tyres, gauge pod and a **** tonne of AN fittings!

Hopefully they will come tomorrow.