+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Audio/Video/Electronics/Security (https://www.japcarforum.com/forumdisplay.php?fid=151)
+--- Thread: widnes_is200's headrest screen walkthrough (/showthread.php?tid=2934)
widnes_is200's headrest screen walkthrough - widnes_is200 - 01-01-2018
legs are hollow butt loom has a round yellow multiplug on them so would never get it down anyway, i just ran them down the side of the leg, if u pull the material a little u get just enough stretch too get it, i used a thin copper welding rod taped too the multi plug and pulled it through,
widnes_is200's headrest screen walkthrough - Sparkystav - 01-01-2018
aaronabbott the legs are hollow stav as i said before
yes i know that mate, but you cant get into them as theres no hole inside the headrest.
wanted to know if he'd gone through the legs how he'd made the hole
widnes_is200's headrest screen walkthrough - widnes_is200 - 01-01-2018
getting a photo now, give me a few min,
stav is correct the pins in the headrest have no way in .
widnes_is200's headrest screen walkthrough - aaronabbott - 01-01-2018
Sparkystav yes i know that mate, but you cant get into them as theres no hole inside the headrest.
wanted to know if he'd gone through the legs how he'd made the hole
sorry mate i understand now:blushing:,i drilled a hole in the very top of 1 of legs to run it down
widnes_is200's headrest screen walkthrough - Sparkystav - 01-01-2018
aaronabbott sorry mate i understand now:blushing:,i drilled a hole in the very top of 1 of legs to run it down
nice one, will try that
widnes_is200's headrest screen walkthrough - widnes_is200 - 01-01-2018
![[Image: 100_0510.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/100_0510.jpg)
![[Image: 100_0511.jpg]](http://i991.photobucket.com/albums/af31/widnes_is200/100_0511.jpg)
when headrest down u cant see it at all
widnes_is200's headrest screen walkthrough - Sparkystav - 01-01-2018
excellent work mate they do look great
widnes_is200's headrest screen walkthrough - aaronabbott - 01-01-2018
i get a pic of mine tomorrow so you can see how they go through the poles
widnes_is200's headrest screen walkthrough - russelllinn - 01-01-2018
looks good mate and a good walk through, I guess to feed the wire down the tube then into the rear of the seat so it comes out the bottom you'd need to remove the plug and re wire it?
widnes_is200's headrest screen walkthrough - widnes_is200 - 02-01-2018
russelllinn looks good mate and a good walk through, I guess to feed the wire down the tube then into the rear of the seat so it comes out the bottom you'd need to remove the plug and re wire it?yes mate thats y i went next to it, diddnt want any joins