+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: koka and his projekt (/showthread.php?tid=3049)
koka and his projekt - Sparkystav - 08-01-2018
thats really not safe if the readings accurate
koka and his projekt - steviewevie - 08-01-2018
Surely that reading is inaccurate ? At least, I hope so ! :ohmy:
koka and his projekt - dimis - 08-01-2018
He must fit a better aftermarket ecu
koka and his projekt - dimis - 08-01-2018
Sort of, his is based on the TTE SC with some of his own mods/improvements
koka and his projekt - rob - 08-01-2018
so if he has a 150mm pulley and larger injectors i would expect to see a bit more power!
koka and his projekt - steviewevie - 08-01-2018
rob so if he has a 150mm pulley and larger injectors i would expect to see a bit more power!
Yeah but did you see his post about the belt slipping at 4500rpm ? Apologies if you had already taken that into consideration though.
koka and his projekt - Asi - 08-01-2018
i reckon he will get a lot more once he gets a tighter belt!
koka and his projekt - Spoon - 08-01-2018
I had 217 HP with the original TTE setup. Only modified exhaust system.
koka already given up yet!
Respect for this work
koka and his projekt - dimis - 08-01-2018
Koka and you Spoon have one of the best modified IS200 SC
koka and his projekt - Asi - 08-01-2018
217 hp thats good for the charger alone