+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Custom Dome Badges (/showthread.php?tid=6001)
Custom Dome Badges - Moley - 26-09-2018
Ok Chris I'll try that and see what happens.
Would you have a link to a polishing mop I could buy for a small bench grinder . 5 or 6 " I think
My mate has one that I could get a shot of
Custom Dome Badges - Bandit - 26-09-2018
Moley Ok Chris I'll try that and see what happens.
Would you have a link to a polishing mop I could buy for a small bench grinder . 5 or 6 " I think
My mate has one that I could get a shot of
You could use this one mate, CLICK ME? But if your going to use it on a bench grinder you'll need a pigtail adaptor to use it? Like this CLICK ME? But you would need to find out what size the spindle is on the bench grinder before you could order one to fit??
Another kit i started with was one like this, CLICK ME AGAIN? You use this kit with a power/rechargeable drill and i got the same kit from Maplin for £9.99
Custom Dome Badges - Moley - 26-09-2018
Thanks Chris I'll look into the bench grinder side of it.
I would also use it for my pipes etc etc
Custom Dome Badges - Bandit - 27-09-2018
A kit like this one might be better then mate to get you started, CLICK ME?
Just need to check the size of the bench grinder spindles to make sure the pigtail adaptors fit :thumbup1:
Custom Dome Badges - jay_russell - 05-10-2018
ok mate the news is in and it's good.
yes i can get them for you. just need to know if your wheels are 17" or 18"
and the cost for 4 without posting is about 42 pounds and i guess about 10 pounds for signed for post packet from sweden to you
here is a link to see what they are like. it's number 92 half way down the page. and there 100 kr each plus postage to me here so about 10 each
http://www.specialfalgar.se/f%C3%A4lgtillbeh%C3%B6r/centrumk%C3%A5por.aspx
Custom Dome Badges - Bandit - 05-10-2018
jay_russell ok mate the news is in and it's good.
yes i can get them for you. just need to know if your wheels are 17" or 18"
and the cost for 4 without posting is about 42 pounds and i guess about 10 pounds for signed for post packet from sweden to you
here is a link to see what they are like. it's number 92 half way down the page. and there 100 kr each plus postage to me here so about 10 each
http://www.specialfalgar.se/f%C3%A4lgtillbeh%C3%B6r/centrumk%C3%A5por.aspx
Moley has 19" wheels matey :thumbup1:
Custom Dome Badges - jay_russell - 05-10-2018
then the center must be the same size as 18" then. i can order them home and then check the sizes. might ask them if they have them in stock and get him to check the size but not sure if they can. busy time of the year with winter tyres right now