+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Moscow IS200 turbo (/showthread.php?tid=6040)
Moscow IS200 turbo - Dark Samurai - 04-10-2018
Because he turbo'd it.
Moscow IS200 turbo - Dark Samurai - 04-10-2018
With 1g-gte internals (correct if I'm wrong?)
Moscow IS200 turbo - Lexuspat - 04-10-2018
car looks really good mate
Moscow IS200 turbo - steviewevie - 04-10-2018
EKSIN : (
As I understand the basic 155 hp With "wheels", then how will HP the "wheels" at 320 hp Flywheel?
Now trying to figure out whether to invest in the engine is still the order of $ 3500 or simply buy a 1jz-gte
The stock 153 bhp figure is at the flywheel (engine power), not at the wheels. I put my car on a dyno when the engine was stock, and it delivered 120 bhp at the wheels.
Check out this thread from "Almost Finished". You can see what he did to his car to get 380 bhp at the flywheel. He has forged internals, but the 1G-GTE internals should be able to handle that power too.
A 1JZ is another alternative of course, if you have someone who can fit it and get over all the electronics problems etc.
Moscow IS200 turbo - EKSIN - 04-10-2018
And how in the end you have got BHP to the wheels?
and at what pressure?
Moscow IS200 turbo - steviewevie - 04-10-2018
EKSIN And how in the end you have got BHP to the wheels?
and at what pressure?
On Almost Finished's (Dave's) car ? It's in his thread. 380 bhp was at 1.0 bar, but he was planning to increase the boost to 1.5 bar.
Moscow IS200 turbo - James S - 04-10-2018
Very nice car mate, have you done a lot of the work yourself???
Moscow IS200 turbo - EKSIN - 04-10-2018
steviewevie On Almost Finished's (Dave's) car ? It's in his thread. 380 bhp was at 1.0 bar, but he was planning to increase the boost to 1.5 bar.Thank you for your answers! Hence there is still something to strive for))))
When the bar pressure the plastic intake manifold is not bursting?
James S Very nice car mate, have you done a lot of the work yourself???Almost all done with their hands in the garage ...
exception - the exhaust, I cooked it to order.
And in setting up the car, too, was directly involved, but to a lesser extent.:closedeyes:
Moscow IS200 turbo - steviewevie - 04-10-2018
EKSIN Thank you for your answers! Hence there is still something to strive for))))
When the bar pressure the plastic intake manifold is not bursting?
Please take a look at his thread. For example, he has a different inlet manifold.
Moscow IS200 turbo - EKSIN - 04-10-2018
In him I saw some, but here you have it the base and maintains a hike) You, too, pressure is probably less than a bar ....