JapCarForum
Catch me if you can! - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: The JCF Lounge (https://www.japcarforum.com/forumdisplay.php?fid=17)
+--- Thread: Catch me if you can! (/showthread.php?tid=7945)

Pages: 1 2 3 4 5 6 7


Catch me if you can! - jimxms - 28-05-2019

Reggio. By then I'll be running 12psi at least and meth injection Wink


Catch me if you can! - is300_dino - 28-05-2019

your so lucky


Catch me if you can! - Stoney - 28-05-2019

5.3

Sh*t!

Confusedhock:

:kiltsmilie:


Catch me if you can! - Dark Samurai - 28-05-2019

Scangauge 0-60, give us the info Jimboobie


Catch me if you can! - Sparkystav - 28-05-2019

Looks great mate!


Catch me if you can! - jimxms - 29-05-2019

Dark Samurai Scangauge 0-60, give us the info Jimboobie

Ya want a how to? Need to have the latest firmware ibthink, but it's under Trip>Perf. I'll try and get a vid later when I find a straight road with some good traction


Catch me if you can! - Dark Samurai - 29-05-2019

When everything's sorted and back to normal I'll see if I can update the SG.


Catch me if you can! - jimxms - 30-05-2019

Marsdendean ^^ Get a few videos if you can, one of the speedo, one of the open road etc Smile

I like a good speedo video (inc revs) and can't wait to see how it goes!! I'll be back later tonight to check!

Grabbed a couple of vids but unfortunately none inside the cabin. Was driving alone, and couldn't find anywhere to mount the camera. Time for a headrest mount methinks Wink

http://www.outlawjapclub.co.uk/forum/showpost.php?p=145386&postcount=157


Catch me if you can! - Rabster - 30-05-2019

vids look good mate


Catch me if you can! - jimxms - 06-06-2019

Just an update: The Cusco catch can is a piece of junk. It may look shiny but:

- There's no way to drain the oil from it, as it doesn't have an oil plug.

- The barbs point either down or sideways. Not very good when you're trying to get the oil vapor into the tank with minimal restrictions.

- It has no baffling, which would be fine if you could add your own. But you cant because the tank is welded shut.

- No way to clean inside the tank.


So I've put it on the exhaust side PCV which gets hardly no blow-thru. And ironically I've used fthr £16 Toyosports one as my main tank having filled with with baffling material.