+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My little project - IS200 Turbo (/showthread.php?tid=1216)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
My little project - IS200 Turbo - russelllinn - 01-12-2017
It is a shame that it is taking longer than anticipated and hopefully the snow will thaw a bit and they can crack on with it now, fingers crossed that they can get the bits from the S14 and sort the cookling out. Just keep your eys fixed on the end result though mate :thumbup1:
My little project - IS200 Turbo - Dan_Turism0 - 01-12-2017
S14 bits are a piece of pee to get hold of mate so that's good news there's quite a few cars that used the SR20DET (pulsar/s13,14,15) so shouldn't be a issue sourcing bits.
My little project - IS200 Turbo - Asi - 01-12-2017
stevie if you need any s14 bits let me know my cousin breaking a s14
My little project - IS200 Turbo - steviewevie - 01-12-2017
Thanks Asi. Does his S14 have a turbo ? I'll find out tomorrow how they're getting on and see if they need help getting the bits.
My little project - IS200 Turbo - Asi - 01-12-2017
not a probz mate. just drop a pm if you need anything
its a rear damage so everything you need should be in good nick.
My little project - IS200 Turbo - Asi - 02-12-2017
yep its a turbo mate
My little project - IS200 Turbo - steviewevie - 03-12-2017
Looks like we're find on the turbo coolant fittings now. My turbo is used on the S14 200SX, and it's been confirmed that we can use standard Nissan fittings in that case. These cost about £2 each, as opposed to a huge amount to custom make them ! :thumbup:
Banjo bolt for the oil feed had been made and is hopefully being picked up later.
That just leaves the sump, which still hasn't been done, but is supposed to be ready for Monday.
Just an issue now sorting out whether the silicone hoses for the extra piping (intercooler etc) colour-match with the SFS radiator/power steering hoses that I supplied (in red). So not a massive issue there.
My little project - IS200 Turbo - Lexusboy - 03-12-2017
And we get closer to the day the car get unleshed :thumbup1:
My little project - IS200 Turbo - toxo - 03-12-2017
SFS are great, one of the garages I use has a good trade discount with them :thumbup1: Loads of SFS on my car!
My little project - IS200 Turbo - Mikey - 03-12-2017
best place for s14 bits try apex performance or driftworks