+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: the car i said i would keep standard......... (/showthread.php?tid=3419)
the car i said i would keep standard......... - Sparkystav - 25-08-2020
Fancy measuring the dimensions before fitting them
the car i said i would keep standard......... - is300_dino - 25-08-2020
yup lots of measuring and pics please marc
the car i said i would keep standard......... - Fozzy - 25-08-2020
I could probably make some of those up. How much were they from JS?
the car i said i would keep standard......... - ormi - 26-08-2020
they are £65 can you make them up?you get two sizes 25mm and 35mm.....25mm for up to 50mm lower then the 35mm for the hard core slammed in the weeds look...
the car i said i would keep standard......... - Sparkystav - 26-08-2020
I'm sure there's a gut on driftworks selling them for half of that.
But yeah if you measure them up, then anyone with a lathe should be able to make them.
the car i said i would keep standard......... - ormi - 02-09-2020
well thought i would update as i got a new japspeed exhaust for £104.00...first impressions looked very well built very good welds and a good quality stainless...i then fitted it stood back and thought who measured the hangers on the back box......i like my exhausts to look neat and sit in the gap provided not this one it was about 3 inches out the gap..off it came and then out came the dead blow hammer and fifteen mins of banging and fitting later i got it sitting right...also on the 02 sensor problem ie their is no hole for it i tucked the 02 sensor in to the plastic under guards and no warning light as yet..woopwoop..
im now stainless from the head back
![[Image: 254795_3279497526620_88690578_n.jpg]](https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-snc6/254795_3279497526620_88690578_n.jpg)
![[Image: 579126_3279498006632_660941439_n.jpg]](https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/579126_3279498006632_660941439_n.jpg)
![[Image: 543377_3279498286639_556505156_n.jpg]](https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/543377_3279498286639_556505156_n.jpg)
![[Image: 65396_3279498646648_352053194_n.jpg]](https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn1/65396_3279498646648_352053194_n.jpg)
![[Image: 249452_3279499126660_48515990_n.jpg]](https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-snc6/249452_3279499126660_48515990_n.jpg)
and i will say one thing f&*k me its loud..a really deep note..pops and bangs all the time ill get a sound clip up soon..
the car i said i would keep standard......... - Sparkystav - 02-09-2020
Looks nice mate! Be careful with the O2 sensor though as their heated so don't want it melting anything.
the car i said i would keep standard......... - ormi - 02-09-2020
oh [email protected] the rear one?i thought it was only the top two that were heated?
the car i said i would keep standard......... - Sparkystav - 02-09-2020
Nope all are heated mate.
the car i said i would keep standard......... - ormi - 02-09-2020
aaaaaa po0p its got a spacer on it so hope that stops it melting through the under trays..lol