JapCarForum
Phaebo IS200 Supercharged (NL) - Printable Version

+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: Phaebo IS200 Supercharged (NL) (/showthread.php?tid=11949)

Pages: 1 2 3 4 5 6 7 8 9

Phaebo IS200 Supercharged (NL) - john wan - 13-04-2021

So what car did you get the green injectors off mate did they make a diffrence ?car looks wicked

Phaebo IS200 Supercharged (NL) - phaebo - 13-04-2021

The green injectors are from a toyota celica 1.8 vvti. With 1zz-fe engine.
They are straight fit with new o-rings fitted from the lexus is200 injectors.

Wih the standard pulley 130mm you can allready feel diffrence. Before i had a little bit stuttering under 2000 rpm and full throttle. Now the car pulls a lot better with full throttle at lower rpms. So it is a nice upgrade.

Phaebo IS200 Supercharged (NL) - phaebo - 13-04-2021

The green injectors are from a toyota celica 1.8 vvti. With 1zz-fe engine.
They are straight fit with new o-rings fitted from the lexus is200 injectors.

Wih the standard pulley 130mm you can allready feel diffrence. Before i had a little bit stuttering under 2000 rpm and full throttle. Now the car pulls a lot better with full throttle at lower rpms. So it is a nice upgrade.

Phaebo IS200 Supercharged (NL) - john wan - 13-04-2021

Ah cool chears

Phaebo IS200 Supercharged (NL) - phaebo - 18-09-2021

Well I havent updated this for a while. So here it goes.
In the meanwhile I had my 145mm pulley fitted together with a 5pk820 belt. It is a tight fit but I have no slip on higher rpms. Also some new Bling goodies for under the hood. Stainless polished coilover covers Home made and a blue radiator cap.
Also bought myself an AEM failsafe which measures the air fuel ratio and the intake air pressure.

Now I can tell that the car pulls very good with the 145mm pulley and the 1zzfe injectors.
When on cruise mode the air fuel ratio is around 14,7
when I pull it goes to 13
When on wide open throttle near the rev limiter the air fuel ratio goes between 11,5 and 12
So I think these are pretty good numbers. The car drives really nice and pulls good.
This is the complete setup

Bemani supercharger setup
145 mm pulley
1zz-fe injectors 250cc
patricks blackbox
de-cat manifold and de-cat exhaust
bigger intercooler
IK22 spark plugs
cold air intake
aem wide band Failsafe gauge ( air fuel ratio and charge pressure meter in one )

Running 0,5 bar pressure near the rev limiter with 145mm pulley


Here are the pics I took
[Image: IMG_1141.jpg]
[Image: 620.jpg]
[Image: IMG_1288.jpg]
[Image: IMG_1289.jpg]
[Image: IMG_1142.jpg]
[Image: IMG_1290.jpg]
[Image: IMG_1292.jpg]
[Image: IMG_1142.jpg]
No pics yet from the wideband gauge but here is were I fitted the wideband o2 sensor for the aem gauge.
[Image: IMG_1317.jpg]
[Image: IMG_1318.jpg]
[Image: IMG_1317.jpg]

Phaebo IS200 Supercharged (NL) - Sparkystav - 18-09-2021

I like them covers mate, well made!

Phaebo IS200 Supercharged (NL) - phaebo - 03-10-2021

Winter is coming so i thought my oem winter wheels needed some color.
Since most people have black wheels or steelies in the winter i thought lets give the winter some color.
[Image: null_zps9d499a21.jpg]
[Image: null_zps6b91b601.jpg]
[Image: image.jpg]

Phaebo IS200 Supercharged (NL) - sprinter2012 - 03-10-2021

Nice, certainly won't get lost in the snow with those! Wink

Sent from my LT26i using Tapatalk

Phaebo IS200 Supercharged (NL) - Sparkystav - 03-10-2021

i actually really like that colour and it goes well with the cars colour

Phaebo IS200 Supercharged (NL) - phaebo - 03-10-2021

Thanks guys! And actually also doesnt get lost at night. It almost looks like they light up in the dark