+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: the car i said i would keep standard......... (/showthread.php?tid=3419)
the car i said i would keep standard......... - Moley - 28-02-2018
ormi cheeky buggers :lol: sats a 4 hour day i made 9 hours.... i start at 8.30....went to work at 7...... started polishing then and just worked on my car when i had a spare min... and left work at 12.45..with a very shiney car....:w00t:
From 7 to 12.45 is only 5 and 3/4 hours not 9
the car i said i would keep standard......... - ormi - 28-02-2018
em coilovers for a low vip look(getting this month) some green brake hoses,poss a short shift kit and poss some chassi bracing front and rear...
eeeemmmmm thats about it.
yes moley but i clock in at 8 and clock out at 12.4 hours. i dont work on customers cars before 8 or after 12.(4 hours)
what i ment was in a 4 hour working day i made 9 hours ie if you get 2 hours for a service and you can do it in 1 then you can do 4 two hour services in 4 hours their for making 8 hours in a 4 hour day...time saved bonus...ie i'm good and fast at what i do..lol
the car i said i would keep standard......... - Moley - 28-02-2018
Ok matey, you have done a good job polishing it and its a very good idea doing that on a ramp !!
How much would a ramp cost if someone wanted to put one in their garage :wink::wink:
Ps, did you get my pm ??
the car i said i would keep standard......... - ormi - 28-02-2018
you can get second hand ramps(2 poster ramp) for between £650-£2000 you can also buy cheap new ramps for £1200 -£3000 don't know how much for fitting though but it doesn't take them long to fit them.
i'll go check my clamps i need to get some too mate.....
the car i said i would keep standard......... - Moley - 28-02-2018
Cheers mate, just thought I would ask, because if we move house and when I get a new garage I'll need to make it big enough for the ramp, like the one in your pic !!
the car i said i would keep standard......... - ormi - 28-02-2018
thats a four poster one just as cheap mate and it would come in handy for you but you would need to buy a beam jack to go with it (unless one comes with it)....so you can jack up the front or the rear of the car..
the car i said i would keep standard......... - Lexusboy - 28-02-2018
Ormi you're car is a credit to you.
You're a lucky man to have a beautiful wife and Car.
Look forward to seeing your car soon...:thumbup1:
the car i said i would keep standard......... - steviewevie - 02-03-2018
You've done some great polishing work there Ormi ! :w00t:
the car i said i would keep standard......... - ormi - 19-03-2018
well heres my new coilovers will be getting fitted after work tomorrow!!:wink::wink::wink:
also got moley's cutting disks so going to give the crash bar a trimming down and open up the front bumper.
![[Image: p300410205201.jpg]](http://img534.imageshack.us/img534/4110/p300410205201.jpg)
![[Image: p3004102052.jpg]](http://img709.imageshack.us/img709/9391/p3004102052.jpg)
the car i said i would keep standard......... - DaveEdin - 19-03-2018
Looks like you'll be "almost done" again shortly eh mate?