+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Car Care & Detailing (https://www.japcarforum.com/forumdisplay.php?fid=153)
+--- Thread: Project IS200 Polished Rocker Cover :-) (/showthread.php?tid=3788)
Project IS200 Polished Rocker Cover :-) - Bandit - 15-03-2018
Marsdendean Chris.
Why don't you start earning money like this as a side line? Your very good, and i know half of OJC would buy shiny bits from you??
Very good work IMO
Its getting the bits to start with mate :Sulk:
I've got a couple of guys after the polished rad brackets at the moment, but only have 1 set to play with, :Chair:
Think i need to get to a breakers and see if i can get some bits stocked up :thumbup1:
Project IS200 Polished Rocker Cover :-) - Andy-R. - 15-03-2018
Chris your table needs treating:Fish:
Looking good mate:thumbup1:
Project IS200 Polished Rocker Cover :-) - Bandit - 15-03-2018
Andy-R. Chris your table needs treating:Fish:
Looking good mate:thumbup1:
Cheers matey :thumbup1:
:Chair: Yes mate the tables another job on my ever growing list along with putting my new 8x6 shed up,
so I'll have 2x 8x6 sheds soon and a 5x3
moke: Ones going to be my work shop though :w00t::w00t::thumbup1:
Project IS200 Polished Rocker Cover :-) - Bandit - 15-03-2018
Doing a set of alloys at the moment mate, started to sand my old 5 spokes down that have been in the shed for a bit
How many alloys have you got mate? have you got a set of 5?
Project IS200 Polished Rocker Cover :-) - spikes - 15-03-2018
cover lookin good chris :thumbup1:
Project IS200 Polished Rocker Cover :-) - Andy-R. - 15-03-2018
Another shed:ohmy: no wonder spares for an IS are in short supply you've got them all:tongue_smilie:
Project IS200 Polished Rocker Cover :-) - Demon - 15-03-2018
Chris, this is fantastic!
When you sell stuff like this you need to offer it on a excjange basis so you get their stock item in return as well as some cash so that you can continue getting more cash!!!!!
+Rep
My Starlet GT rocker cover is one of the worst castings i have seen, there is so much pitting its unreal. Looks similar to the IS version but it has some real tricky groves in it and lettering to go round also.........
Jason
Project IS200 Polished Rocker Cover :-) - steviewevie - 15-03-2018
Yeah all you really need is one set of the item in advance. And you seem to already have that with the rocker cover. Then as Jason says, you can sell the rocker cover for someone in exchange for their existing one, so you should be off and running :biggrin:
That rocker cover looks awesome, would love one of those ! :drool:
Project IS200 Polished Rocker Cover :-) - Demon - 15-03-2018
I have bought a spare oil filter bracket and Thermostat housing for the buggy Chris so i can polish them up then swap them on my engine. Your more than welcome to the standard parts mate after i put the polished parts on. Then you have some parts to sell to the Starlet guys........
Project IS200 Polished Rocker Cover :-) - Moley - 15-03-2018
Well that dose look great Chris ,but also looks like a lot of effort.
But I think it would go nice with my rad brackets
moke: