+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: SPC Horsham Project IS 550 (/showthread.php?tid=906)
SPC Horsham Project IS 550 - steviewevie - 01-07-2017
supratruck Intention is to drive it at 0.6 for a few month's and then turn up the wick , not scared to break it as we nead to see what goes when , Already have a short end with all internal.s ready to go .It'll be very interesting to see what breaks and when. Which turbo are you running ?
Will the injectors be ok ? Is there a risk that as you turn up the boost, you'll max out the injectors, then the engine will lean out and melt pistons ? So you won't know which part of the internals will break purely down to the bhp ?
Or are you prepared for this, and if does happen, you'll put in bigger injectors and standard internals to continue testing ?
SPC Horsham Project IS 550 - Dan_Turism0 - 01-07-2017
lots of good questions there steve
SPC Horsham Project IS 550 - Bandit - 01-07-2017
Mate be good to have you at JAE, was watching the dyno run of your supratruck earlier and thats a right animal and be good to see the old motor again :w00t:
SPC Horsham Project IS 550 - steviewevie - 01-07-2017
Current pics of the car :
![[Image: RIMG0901.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/RIMG0901.jpg)
![[Image: RIMG0907.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/RIMG0907.jpg)
SPC Horsham Project IS 550 - SPChorsham.com - 01-07-2017
steviewevie It'll be very interesting to see what breaks and when. Which turbo are you running ?
Will the injectors be ok ? Is there a risk that as you turn up the boost, you'll max out the injectors, then the engine will lean out and melt pistons ? So you won't know which part of the internals will break purely down to the bhp ?
Or are you prepared for this, and if does happen, you'll put in bigger injectors and standard internals to continue testing ?
Turbo is a GT30
Std injectors with an external pressure reg
Aem Fuel and ignition controller
Injectors will max out at approx .8 bar
Bigger injectors will be used to go further!!
hock:
SPC Horsham Project IS 550 - steviewevie - 01-07-2017
Which GT30 is it exactly ?
Why the pressure regulator for the injectors ? So will you make sure you change the injectors before they max out ?
Sorry for all the questions, but please take it as a compliment that I'm very interested to hear how you get on, as I'm sure are lots of other folks here ! :biggrin:
SPC Horsham Project IS 550 - aaronabbott - 01-07-2017
is550 Turbo is a GT30
Std injectors with an external pressure reg
Aem Fuel and ignition controller
Injectors will max out at approx .8 bar
Bigger injectors will be used to go further!!
so if i was go go for this setup what would be the cost
SPC Horsham Project IS 550 - supratruck - 01-07-2017
Gord You are more than welcome mate :thumbup: just need to pay and your in :thumbup:
Thank.s Gord , Put me down for coming :thumbup:
SPC Horsham Project IS 550 - steviewevie - 01-07-2017
supratruck Thank.s Gord , Put me down for coming :thumbup:Great ! :thumbup:
I've added you to the list. Which days are you coming, and do you want to camp by our stand ?
Please see this thread for details of how to pay etc :biggrin:
SPC Horsham Project IS 550 - Lexusboy - 01-07-2017
Supratruck,
Are you bring a Jap vehicle for the club stand and are you camping?
I need this confirmed because of numbers.
I have added your name to the list.:thumbup1: