+- JapCarForum (https://www.japcarforum.com)
+-- Forum: Cars, Cars, Cars! (https://www.japcarforum.com/forumdisplay.php?fid=11)
+--- Forum: Project Cars (https://www.japcarforum.com/forumdisplay.php?fid=156)
+--- Thread: My Indecisive 4.0 V8 1UZ-FE Project (/showthread.php?tid=8943)
My Indecisive 4.0 V8 1UZ-FE Project - toxo - 07-10-2021
The stock wiring is silly. It's either 8 or 10AWG from the fuel pump relay, all the way back to the boot, but then inside the fuel tank it's tiny. I know some of that will be to combat voltage drop at ~15A along the length of the car but it's still daft IMO. Anyway now the battery is next to the fuel tank and the wiring is all 10AWG I should be laughing.
My Indecisive 4.0 V8 1UZ-FE Project - toxo - 13-10-2021
Did loads more wiring today, nearly removed and catalogued all of the wiring in the engine bay. For a nice big connector for the fuel pump too
Trying out my new crimping tool
![[Image: IMG_20131124_122124.jpg]](http://theshado.WS/images/ojc/ruze/IMG_20131124_122124.jpg)
Stock wiring isn't up to the job so drilled some new holes
![[Image: IMG_20131124_122804.jpg]](http://theshado.WS/images/ojc/ruze/IMG_20131124_122804.jpg)
Very tight fit grommets so vapour doesn't leak
![[Image: IMG_20131124_122816.jpg]](http://theshado.WS/images/ojc/ruze/IMG_20131124_122816.jpg)
The finished article
![[Image: IMG_20131124_122831.jpg]](http://theshado.WS/images/ojc/ruze/IMG_20131124_122831.jpg)
My Indecisive 4.0 V8 1UZ-FE Project - toxo - 13-10-2021
****, could someone change those photo links please. Filenames for the last 3 should be
IMG_20131124_122804.jpg
IMG_20131124_122816.jpg
IMG_20131124_122831.jpg
My Indecisive 4.0 V8 1UZ-FE Project - Sparkystav - 13-10-2021
Done mate
My Indecisive 4.0 V8 1UZ-FE Project - Sparkystav - 13-10-2021
Tidy job! Some good height to work with, in the IS the tank is really shallow so you don't get much to play with
My Indecisive 4.0 V8 1UZ-FE Project - toxo - 13-10-2021
I've still got my copy feed tank baffle to drop in there and the bit that clips on the bottom of the hanger to hold the pump on but neither have turned up yet!
My Indecisive 4.0 V8 1UZ-FE Project - Rabster - 13-12-2021
so any more updates ?
My Indecisive 4.0 V8 1UZ-FE Project - toxo - 13-12-2021
No, haven't touched it for weeks!
My Indecisive 4.0 V8 1UZ-FE Project - el_bandido - 09-11-2022
bump!
My Indecisive 4.0 V8 1UZ-FE Project - Rabster - 11-11-2022
Any update john