+- JapCarForum (https://www.japcarforum.com)
+-- Forum: General Discussions (https://www.japcarforum.com/forumdisplay.php?fid=3)
+--- Forum: New Members (https://www.japcarforum.com/forumdisplay.php?fid=16)
+--- Thread: New Member hoping to install sc to my is200 (/showthread.php?tid=13697)
New Member hoping to install sc to my is200 - Xtremist - 16-05-2022
Ok Thanks Pat I'll order it now
New Member hoping to install sc to my is200 - Xtremist - 19-05-2022
Can anyone tell me if there is a 130mm pulley for supercharger conversion for sale on this site or is it possible to use the pulley from a CHEVROLET KALOS 2005 1.4 16V POWER STEERING PUMP
THIS HAS A 130MM PULLEY on ebay ?
New Member hoping to install sc to my is200 - Lexuspat - 19-05-2022
The problem with finding a different one nate is the nount point, if its too deep or too shallow wont line up with the cradle.
Other than that mate its goig through the group buy thing thats taking place or getting a copy made
Sent from my GT-I9505 using Tapatalk
New Member hoping to install sc to my is200 - Xtremist - 19-05-2022
Ah Ok Thanks fella I suppose I'll start the hunt for the right one then
New Member hoping to install sc to my is200 - Sparkystav - 19-05-2022
Your best searching for a place to make you one mate. To the same spec as the normal one but bigger.
New Member hoping to install sc to my is200 - Xtremist - 19-05-2022
Yeah there isn't any places around my way that will bother with it I think I might go to a few scrap dealers and buy a few and see if any of them line up first as it will work out a lot cheaper
New Member hoping to install sc to my is200 - Lexuspat - 19-05-2022
My only advice and ive said it before even if its out by a mm it will shred belts and destroy any work u have done. Its really not worth the damage speak to the group buy or find someone selling a standard 130mm pulley
Sent from my GT-I9505 using Tapatalk
New Member hoping to install sc to my is200 - Xtremist - 19-05-2022
Ok mate I'll have a look and ask about also I will say I've just bolted the charger on to the cradle I bought and noticed the frame was very slightly warped as I needed to lift the back part slightly to fit the peice in that goes between the manifold
New Member hoping to install sc to my is200 - Xtremist - 19-05-2022
Which made the supercharger in even but I've got the bolts in and tightened which has pulled it flat again was worried I was going to de thread the bolts though lol
New Member hoping to install sc to my is200 - Xtremist - 19-05-2022
Uneven not in even